Burner Adjustments

Front Glass Enclosure Panel, Removal and Installation.

WARNING: NEVER OPERATE THE AP- PLIANCE WITHOUT THE GLASS ENCLO- SURE PANEL IN PLACE AND SECURE. DO NOT OPERATE APPLIANCE WITH THE FRONT GLASS PANEL CRACKED, BRO- KEN OR MISSING. REPLACEMENT PAN- ELS ARE AVAILABLE THROUGH YOUR LOCAL LENNOX DEALER AND MUST BE INSTALLED BY A LICENSED OR QUALI- FIED SERVICE TECHNICIAN.

These are direct-vent appliances. They are designed to operate only with the front glass enclosure panel properly installed. Gener- ally, the glass enclosure panel should not be removed except to gain access to the com- ponents within the firebox, and the appli- ance may only be operated without the front glass enclosure panel in place for very brief periods of time during initial appliance check- out and adjustment.

During this appliance checkout and adjust- ment period, a potential safety hazard exists

-EXERCISE EXTREME CAUTION to prevent the occurrence of any burn injuries from the exposed flames or hot surfaces. Also note, that while the front glass enclosure panel is removed, the flame appearance will appear to be smaller than normal.

WARNING: HANDLE THE GLASS WITH EXTREME CARE! TEMPERED GLASS IS SUSCEPTIBLETODAMAGE(SCRATCHES, FOR EXAMPLE) – HANDLE GLASS DOOR (GLASS ENCLOSURE PANEL) GENTLY WHILE REINSTALLING IT.

WARNING: NO NOT ATTEMPT TO SUB- STITUTE THE MATERIALS USED ON THIS DOOR, OR REPLACE CRACKED OR BRO- KEN GLASS WITH ANY MATERIALS OTHER THAN THOSE PROVIDED BY THE APPLIANCE MANUFACTURER.

WARNING: DO NOT OPERATE APPLI- ANCE WITH THE GLASS FRONT RE- MOVED, CRACKED OR BROKEN. RE- PLACEMENT OF THE GLASS SHOULD BE DONE BY A LICENSED OR QUALI- FIED SERVICE PERSON.

Refer to Figure 7 and remove the front glass enclosure panel as follows:

1.Remove the cast iron, arched or rectangular face kit.

CAUTION: DO NOT ATTEMPT TO REMOVE UNTIL THE FACEPLATE IS COOL.

A)Cast Iron Face Kit:

1.Lift the top arched piece up and pull directly out.

2.Lift the bottom piece up and pull directly out.

3.Lift the side pieces up and pull directly out.

B)Arched or Rectangular Face Kit:

1.Lift the face assembly up and pull directly out.

2.Locate the two (2) latches at the top of the control compartment and disengage them from the door frame's bottom Vee-flange, pulling down on their handles to open them.

3.Swing the bottom of the door out and raise it slightly to lift the top flange of the door frame away from the appliance.

Top Flange
Door Frame	Vent Restrictor
	Adjustment Rod
	Glass Door

Latch

Bottom Vee-flange

Door Frame	Latch
	Firebox Floor

Figure 7

To install the front glass enclosure panel, proceed as follows:

1.Retrieve the glass door frame. Visually inspect the gasket on the backside of the panel. The gasket surface must be clean, free of irregularities and seated firmly.

NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE.

2.Position the door frame in front of the firebox opening and engage the top flange over the lip at the top of the firebox opening.

3.Swing the door down and back. Ensure the gasket seats evenly as the door draws shut. Engage the Vee-flange at the bottom of the door with the latches and close the latches to secure the door.

4.Hook the cast iron, arched or rectangular facade onto the face of the fireplace.

The following paragraphs address burner ad- justment concerns and procedures.

Flame Appearance and Sooting

Proper flame appearance is a matter of taste. Generally most people prefer the warm glow of a yellow to orange flame. Appliances operated with air shutter openings that are too large will exhibit flames that are blue and transparent. These weak, blue and transparent flames are termed anemic. If the air shutter opening is too small sooting may develop.

Sooting is indicated by black puffs developing at the tips of very long orange flames. Sooting results in black deposits forming on the logs, appliance inside surfaces and on exterior sur- faces adjacent to the vent termination. Sooting is caused by incomplete combustion in the flames and a lack of combustion air entering the air shutter opening.

To achieve a warm yellow to orange flame with an orange body that does not soot, the shutter opening must be adjusted between these two extremes. No smoke or soot should be present. Reposition the logs if the flames impinge on any of them.

If the logs are properly positioned and sooting conditions exist, the air shutter opening on the main burner tube should be adjusted. Normally, the more offsets in the vent system, the greater the need for the air shutter to be opened further.

WARNING: AIR SHUTTER ADJUSTMENT SHOULD ONLY BE PERFORMED BY A QUALIFIED PROFESSIONAL SERVICE TECHNICIAN.

ENSURE THAT THE FRONT GLASS PANEL IS IN PLACE AND SEALED DURING ADJUSTMENT.

LSS-40CP specifications

The Magnavox LSS-40CP is a noteworthy addition to the realm of home entertainment, combining innovative technology with user-friendly features. Launched as part of Magnavox's commitment to delivering quality audio and visual experiences, this model stands out for its versatility and functionality.

One of the key features of the LSS-40CP is its impressive display technology. Equipped with a high-definition LCD screen, it offers vibrant colors and sharp image clarity that enhance the overall viewing experience. The 40-inch display strikes a balance between size and usability, making it suitable for various room settings, from cozy living rooms to larger entertainment spaces.

Audio quality is another highlight of the Magnavox LSS-40CP. It integrates advanced sound technology that ensures a rich and immersive audio experience. The built-in speakers produce clear and powerful sound, while options for external audio connections allow users to further enhance their sound system for movie nights or gaming sessions.

Connectivity is a crucial feature of modern entertainment devices, and the LSS-40CP excels in this area. It includes multiple HDMI and USB ports, enabling seamless connections to various devices such as gaming consoles, streaming devices, and external media players. This versatility ensures that users can easily switch between different input sources, catering to an array of entertainment preferences.

The LSS-40CP also features smart technology integrations, allowing for access to streaming services and apps directly on the device. Users can easily enjoy their favorite shows and movies without the need for additional hardware. The user interface is designed to be intuitive, providing straightforward navigation for accessing content quickly.

In terms of design, the Magnavox LSS-40CP showcases a sleek and modern aesthetic that complements contemporary home decor. Its slim bezel design maximizes screen real estate while maintaining an elegant appearance.

Furthermore, energy efficiency is an important attribute of the LSS-40CP. With its advanced technology, it minimizes power consumption while delivering top-notch performance, aligning with eco-friendly initiatives and saving users on electricity bills.

In summary, the Magnavox LSS-40CP integrates cutting-edge technology with practical features, making it an attractive option for those seeking a quality home entertainment experience. Its combination of visual and audio performance, connectivity options, and smart capabilities positions it as a noteworthy contender in the market, appealing to both casual viewers and dedicated enthusiasts.