Regency GFI55 Ash Pan, Heat Exchanger Tubes, Fresh AIR Intake, Exhaust Vent, Blower Mechanisms

Page 11

MAINTENANCE

ASH PAN

(weekly)

The ash pan is located under the burner. Always dispose of the ashes into a metal container (never use cardboard, plastic or wood containers) stored away from combustibles. Monitor the ash level every week. Remember different pellet fuels will have different ash contents. Ash content is a good indication of fuel efficiency and quality. Refer to "Safety Warnings and Recommendations" for disposal of ashes.

Freestanding: To remove the ash pan, simply turn the knob and pull out towards the front.

Insert: To remove the ash pan open the door, remove the burn pot liner and the burn pot, then pull the ash pan out.

DO NOT PLACE UNBURNED OR RAW PELLET FUEL IN ASH PAN.

Ash Pan Door Lock

Locked

12:00 o'clock position

Open

9:00 o'clock position

Figure 10: Ash Pan Door Lock shown in 12:00 o'clock position.

HEAT EXCHANGER TUBES

(weekly)

Open the door and the rod is located under the unit top, in the center of the stove just behind the door (see Figure 11). This handle is to be pushed in and out a few times (ONLY WHEN THE UNIT IS COLD) in order to clean away any fly ash that may have collected on the heat exchanger tubes. As different types of pellets produce different amounts of ash, cleaning of the tubes should be done on a regular basis to enable the unit to run efficiently.

Figure 11: Heat Exchanger Tube Cleaner.

FRESH AIR INTAKE

(season)

Inspect periodically to be sure that the intake pipe is not clogged with any foreign materials.

EXHAUST VENT

(season)

This vent should be cleaned every year or after two (2) tons of pellets (whichever happens first). We recommend contacting your dealer for professional cleaning. To clean the vent pipe, tap lightly on the pipe to dislodge any loose ash. Open the bottom of the “T” to dump the ash, then vacuum as much of the ash out of the vent pipe as possible.

BLOWER MECHANISMS

(bi-annual)

Unplug the stove then open the right and left side panels to access the two blowers. Vacuum all dust from motors and impellers. The convection blower should be oiled twice yearly using 3 in 1 oil or similar light oil. The combustion blower requires no lubrication. Check gaskets and replace if needed.

ALL HINGES

(season)

Check all the hinges on the unit to ensure proper movement.

MAINTENANCE

Greenfire Pellet Stove and Insert Owner's Manual

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents GF55 & GFI55 To the NEW Owner FPI Fireplace ProductTable of Contents Étiquettecette Pasretirez Safety LabelKeep ASH PAN Free of RAW Fuel InstallationSafety Warnings & Recommendations USE of Cordwood is Prohibited by LAWI. Pellet Standards Important Safety InformationPellet Quality Control Board Functions Automatic Safety FeaturesOperating Instructions Operating Your Pellet Stove Manual ModeHigh / LOW Mode Auto / OFF ModeSpecial Notes Hopper Grate InstallationSlider / Damper Must be SET AT Time of Installation Slider / Damper SET-UPRoutine Cleaning & Maintenance MaintenanceExhaust Vent ASH PANHeat Exchanger Tubes Fresh AIR IntakeReplacing Door Glass Exhaust Passages Post Season CLEAN-UPCleaning Plated Surfaces Firebox PanelLimited Lifetime Warranty WarrantyExclusions and Limitations Warranty Installer Please complete the following information

GFI55 specifications

The Regency GFI55 is a remarkable gas fireplace insert that combines elegance with advanced technology, offering warmth and style to any home setting. It is engineered for efficient heating, making it an excellent choice for those seeking to enhance their living spaces with both functionality and aesthetic appeal.

One of the standout features of the GFI55 is its impressive heating capacity. With an output of up to 40,000 BTUs, it is capable of heating larger areas effectively, providing cozy warmth even in expansive rooms. This makes it ideal for open-concept designs where the heat must be distributed evenly.

The design of the GFI55 is both classic and contemporary, featuring a large viewing area that showcases the mesmerizing flames. The flame presentation is enhanced by ceramic logs, which not only look realistic but also contribute to the fireplace's overall efficiency by retaining heat.

Technologically, the Regency GFI55 boasts a range of innovative features. It includes a high-efficiency heat exchanger which maximizes heat output while minimizing energy consumption, ensuring that users enjoy warmth without excessive energy bills.

Safety is also a priority in the design of the GFI55. It is equipped with an automatic shut-off feature that activates in case of overheating, providing peace of mind for families. Additionally, the unit meets stringent safety standards, ensuring that it is a secure option for residential use.

Installation is made easy with the GFI55, which can fit into most standard fireplace openings, allowing for a straightforward retrofit into existing masonry fireplaces. This adaptability makes it an appealing choice for homeowners looking to upgrade their current heating solutions without the need for extensive renovations.

Moreover, the GFI55 offers customizable options to suit individual tastes. Homeowners can choose from different finishes and decorative trims, ensuring that the fireplace complements their home's interior design.

In summary, the Regency GFI55 gas fireplace insert is an exceptional product that marries advanced technology with elegant design. Its efficient heating capabilities, safety features, and customization options make it an excellent investment for anyone looking to enhance their home's ambiance and comfort.
Top Page Image Contents