Regency GFI55 owner manual Slider / Damper SET-UP, Hopper Grate Installation, Special Notes

Page 9

OPERATING INSTRUCTIONS

SLIDER / DAMPER SET-UP

THE SLIDER / DAMPER MUST BE SET AT TIME OF INSTALLATION.

A Qualified Service Technician or Installer must set the Slider Damper. This is used to regulate the airflow through the pellet stove. The slider damper knob is located on the left cab side (see Figure 7).

Figure 7: Slider / Damper Knob.

Figure 8: Efficient Flame.

SPECIAL NOTES:

Pellet quality is a major factor in how the Pellet stove will operate. If the pellets have a high moisture or ash content the fire will be less efficient and has a higher possibility of the fire building up and creating clinkers (hard ash build-up).

HOPPER GRATE INSTALLATION

OPERATION

If the fire should happen to go out and the heat output indicator has been set on the lowest setting, the Slider Damper should be pushed in slightly, decreasing the air in the firebox.

If, after long periods of burning, the fire builds up and overflows the burn pot or there is a build up of clinkers, this would be a sign that the pellet quality is poor, this requires more primary air, the slider damper must be pulled out to compensate. Pulling the slider damper out gives the fire more air.

The easiest way to make sure that an efficient flame is achieved is to understand the characteristics of the fire.

•A tall, lazy flame with dark orange tips requires more air – Open slider (pull out) slightly.

•A short, brisk flame, like a blowtorch, has too much air – Close slider (push in) slightly.

•If the flame is in the middle of these two characteristics with a bright yellow/orange, active flame with no black tips then the air is set for proper operation, refer to Figure 8.

The combustion exhaust blower is a variable speed blower controlled by the heat output button. This blower will decrease the vacuum pressure inside the stove and as the heat output button is turned down.

NOTE:

Incorrect use of the Damper will cause malfunction and poor results from your stove or insert.

Important: This grate must be installed into the hopper prior to operating this appliance. For use on freestanding units only.

1.Open hopper door

2.Install the grate ensuring that the four flanges on the grate is pointing downwards into the hopper as per the diagram.

Figure 1. Flanges must face down

Figure 2. Grate installed

Greenfire Pellet Stove and Insert Owner's Manual

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents GF55 & GFI55 To the NEW Owner FPI Fireplace ProductTable of Contents Étiquettecette Pasretirez Safety LabelSafety Warnings & Recommendations InstallationUSE of Cordwood is Prohibited by LAW Keep ASH PAN Free of RAW FuelImportant Safety Information Pellet QualityI. Pellet Standards Automatic Safety Features Operating InstructionsControl Board Functions High / LOW Mode Manual ModeAuto / OFF Mode Operating Your Pellet StoveSlider / Damper Must be SET AT Time of Installation Hopper Grate InstallationSlider / Damper SET-UP Special NotesRoutine Cleaning & Maintenance MaintenanceHeat Exchanger Tubes ASH PANFresh AIR Intake Exhaust VentCleaning Plated Surfaces Exhaust Passages Post Season CLEAN-UPFirebox Panel Replacing Door GlassLimited Lifetime Warranty WarrantyExclusions and Limitations Warranty Installer Please complete the following information

GFI55 specifications

The Regency GFI55 is a remarkable gas fireplace insert that combines elegance with advanced technology, offering warmth and style to any home setting. It is engineered for efficient heating, making it an excellent choice for those seeking to enhance their living spaces with both functionality and aesthetic appeal.

One of the standout features of the GFI55 is its impressive heating capacity. With an output of up to 40,000 BTUs, it is capable of heating larger areas effectively, providing cozy warmth even in expansive rooms. This makes it ideal for open-concept designs where the heat must be distributed evenly.

The design of the GFI55 is both classic and contemporary, featuring a large viewing area that showcases the mesmerizing flames. The flame presentation is enhanced by ceramic logs, which not only look realistic but also contribute to the fireplace's overall efficiency by retaining heat.

Technologically, the Regency GFI55 boasts a range of innovative features. It includes a high-efficiency heat exchanger which maximizes heat output while minimizing energy consumption, ensuring that users enjoy warmth without excessive energy bills.

Safety is also a priority in the design of the GFI55. It is equipped with an automatic shut-off feature that activates in case of overheating, providing peace of mind for families. Additionally, the unit meets stringent safety standards, ensuring that it is a secure option for residential use.

Installation is made easy with the GFI55, which can fit into most standard fireplace openings, allowing for a straightforward retrofit into existing masonry fireplaces. This adaptability makes it an appealing choice for homeowners looking to upgrade their current heating solutions without the need for extensive renovations.

Moreover, the GFI55 offers customizable options to suit individual tastes. Homeowners can choose from different finishes and decorative trims, ensuring that the fireplace complements their home's interior design.

In summary, the Regency GFI55 gas fireplace insert is an exceptional product that marries advanced technology with elegant design. Its efficient heating capabilities, safety features, and customization options make it an excellent investment for anyone looking to enhance their home's ambiance and comfort.
Top Page Image Contents