Weil-McLain CGa CGi, CGs, For Your Safety Read Before Operating, To Turn OFF GAS to the Appliance

Page 21

UserísInformationManual

Operating instructions

CGi, CGs

Spark-ignited pilot

Gas valve Honeywell VR8204/VR8304, White-Rodgers 36C and 36E

FOR YOUR SAFETY READ BEFORE OPERATING

If you do not follow these instructions exactly, a fire or explosion may result causing property damage, personal injury or loss of life.

A.This appliance does not have a pilot. It is equipped with an ignition device which automatically lights the burner. Do not try to light the burner by hand.

B.Before OPERATING, smell all around the appliance area for gas. Be sure to smell next to the floor because some gas is heavier than air and will settle on the floor. See below.

C.Use only your hand to turn the gas control knob. Never use tools. If the knob will not turn by hand, don't try to repair it, call a qualified service technician. Force or attempted repair may result in a fire or explosion.

D.Do not use this appliance if any part has been under water. Immediately call a qualified service technician to inspect the appliance and to replace any part of the control system and any gas control, which has been under water.

WHAT TO DO IF YOU SMELL GAS

Do not try to light any appliance.

Do not touch any electric switch; do not use any phone in your building.

Immediately call your gas supplier from a neighbor's phone. Follow the gas supplier's instructions.

If you cannot reach your gas supplier, call the fire department.

OPERATING INSTRUCTIONS

1.STOP! Read the safety information above on this label.

2.Set the thermostat to lowest setting.

3.Turn off all electrical power to the appliance.

4.Remove jacket front panel.

5.This appliance is equipped with an ignition device which automatically lights the burner. Do not try to light the burner by hand.

6.Turn Gas control knob clockwise to OFF.

7.Wait five (5) minutes to clear out any gas. Then smell for gas, including near the floor. If you smell gas, STOP! Follow "B" in the safety information above. If you don't smell gas, go to the next step.

8.Turn Gas control knob counterclockwise to ON.

9.Turn on all electric power to the appliance.

10.Set thermostat to desired setting.

11.If the appliance will not operate, follow the instructions "TO TURN OFF GAS TO APPLIANCE" below and call your service technician or gas supplier.

12.Replace jacket front panel.

26070

White-Rodgers 36C Gas valve

Position indicator

(shown in "ON" position)

Gas control knob

White-Rodgers 36E Gas valve

Position indicator

(shown in "ON" position)

Gas control knob

Honeywell

VR8204 or

VR8304

Gas valve

Position indicator

(shown in "ON" position)

Gas control knob

TO TURN OFF GAS TO THE APPLIANCE

1.Set the thermostat to lowest setting.

2.Turn off all electric power to the appliance if service is to be performed.

3.Remove jacket front panel.

4.Turn Gas control knob clockwise to OFF. Do not force.

5.Replace jacket front panel.

Part Number 550-110-592/1099

21

Image 21
Contents CGa, CGi, CGs, EG, EGH, LGB, PEG, PFG Please read this page first CGa,CGi,CGs,EG,EGH,LGB,PEG,PFGBoilersSTOP!! Read before proceeding UserísInformationManualBoiler components CGiLGB Tankless water heater EG and EGH only Maintain boiler using schedule belowUser maintenance procedures Check dailyBoiler area Check monthly Automatic air vents if used Main burner flame Clean vent termination & air intake screensPilot burner flame Check condensate drain systemFloat type See Figure Service periodicallyService every 6 months Clean gauge glassOperate boiler relief valve Lighting instructions Follow boiler shutdown procedureEnd-of-season shutdown Propane gas odorantCGa, EG-30 to EG-65 Foryour Safety Read Before LightingPEG-30 to PEG-55 Lighting InstructionsCGa-25 to CGa-6, EG-30 to EG-50, PEG-30 to PEG-50 Position Selector Indicator ArmEG-75, EGH-85, EGH-95 PFG-6, PFG-7Operating Instructions Foryour Safety Read Before Operating Operating instructionsCGa, EG-30 to EG-75, PEG-30 to PEG-55, PFG-5 Spark-ignited pilot Gas valve White-Rodgers 36E CGa-7, CGa-8, EG-55 to EG-75, PEG-55, PFG-5 Spark-ignited pilot Gas valve Robertshaw PFG-6 to PFG-8 EGH-85 to EGH-125For Your Safety Read Before Operating CGi, CGsTo Turn OFF GAS to the Appliance To Place in Operation Annual Shutdown ProcedureSymptom Common Causes Possible Corrections Common problems and solutionsWeil-McLain Blaine Street Michigan City,

CGa specifications

The Weil-McLain CGa is a highly efficient and reliable gas-fired boiler that has established itself as a favorite among homeowners and HVAC professionals alike. Known for its impressive performance and durability, the CGa series is designed to deliver comfort while optimizing energy consumption.

One of the main features of the Weil-McLain CGa is its efficiency. With an AFUE (Annual Fuel Utilization Efficiency) rating of up to 84%, this boiler efficiently converts gas into heat, ensuring minimal energy waste. This efficiency not only translates to cost savings on energy bills but also supports environmental sustainability through reduced emissions.

The CGa boilers are designed for versatility, capable of being used in various applications, including residential heating systems and light commercial settings. With a range of models available, the CGa can meet different heating demands, ensuring consistent comfort regardless of the building size or layout.

The boiler's built-in heating capabilities include the option for either hot water or steam heating, adding to its versatility. Weil-McLain offers multiple BTU outputs across the CGa series, allowing for a customized solution based on specific heating requirements.

State-of-the-art technologies are evident in the CGa's design. The integrated hot surface ignition system enhances start-up reliability, minimizing the risk of combustion issues and ensuring safe operation. Additionally, the unit features a standard draft diverter for efficient venting, allowing for optimal exhaust management within the heating system.

Durability is another key characteristic of the Weil-McLain CGa. Constructed from high-quality materials, these boilers are engineered to withstand the rigors of daily operation. The cast iron heat exchanger provides superior heat retention and longevity, ensuring that the system remains operational for years with proper maintenance.

Installation of the CGa boiler is straightforward due to its compact design and versatile venting options, which can accommodate various installation configurations. This ease of installation combined with a user-friendly interface allows homeowners and technicians alike to manage the system with minimal hassle.

In summary, the Weil-McLain CGa boiler epitomizes efficiency, durability, and versatility. Its advanced technologies and robust construction make it a top choice for those seeking a reliable heating solution for their homes or commercial spaces. With Weil-McLain's commitment to quality and innovation, the CGa series delivers performance that meets the diverse needs of today's heating applications.