Quasar HQ-2244UH operating instructions Power Cord Screw

5.Pull each Frame curtain fully to each window sash track, and pull the bottom window sash down behind the Top retainer bar until it meets.

6.Attach each Frame curtain the window sash by using screws (Type C.) (See Fig. 9)

Screw(Type C)

Fig. 9

7. Slide the unit into the cabinet.(See Fig. 10)

CAUTION: For security purpose, reinstall screws at cabinet's sides.

8.Cut the Foam-strip to the proper length and insert between the upper window sash and the lower window sash.(See Fig. 11)

9.Attach the Window locking bracket with a screw (Type C.) (See Fig. 12)

Power Cord

Screw Screw

Fig. 10

Foam-Strip

Fig. 11

Window locking bracket

Fig. 12

Features and

10.Attach the front grille to the cabinet by inserting the tabs on the grille into the tabs on the front of the cabinet. Push the grille in until it snaps into place.(See Fig.13)

NOTE: Please refer p.6 for setting ventilation kit.

11.Lift the inlet grille and secure it with two screw (Type A) through the front grille.(See Fig. 13)

12.Window installation of room air conditioner is now completed. See ELECTRICAL DATA for attaching power cord to electrical outlet.

Fig. 13

Fig. 14

Installation

13