Pentax AF-360FGZ manual Slave, LCD panel

Press the flash mode button (MODE) to set the flash mode.

00_AF360FGZ.book Page 47 Tuesday, June 13, 2006 12:09 PM

nSlave

With the AF360FGZ, you can take photographs with the flash unit separated from the camera wirelessly in auto or manual mode.

Combine the flash unit with the built-in flash unit of the camera or another flash unit attached to the camera. Before photographing, confirm the following.

1.Whether you can use this function with the combination of your camera and the flash mode you have set.

ÝFunctions Related to Each Flash Mode (page 61 - 68)

2.Precaution When Photographing with a Slave Flash (page 76)

lRefer to page 60 for cameras that support wireless mode.

Procedure

1 Confirm that the slave mode is set to SLAVE2. (Refer to page 49.)

2 Set the flash unit’s power switch to (WIRELESS).

3 Set the wireless mode switch to (S), so that SLAVE is displayed in the upper right corner of

4 the LCD panel.

47