Firstly, set the wireless mode and channel of the AF360FGZ, and register the channel on the camera.
Turn the camera off and then attach the AF360FGZ to the hot shoe of the camera.
Set the power switch of the flash unit to (WIRELESS).
Set the wireless mode switch to (S), so that SLAVE is displayed in the upper right corner of the LCD panel.
00_AF360FGZ.book Page 43 Tuesday, June 13, 2006 12:09 PM
Wireless High-Speed Sync Photography
(Using the AF360FGZ in Combination with a
1
•You cannot set the flash unit to SLAVE while the exposure metering timer is on (while information relating to aperture etc. is displayed in the
viewfinder).
Slide down the setting switch to the (yellow dot) to display the channel on the LCD panel.
Press the channel button (CH) and select a channel from 1CH to 4CH.
Slide the setting switch back up to the (white dot).
43