First, set the wireless mode and channel of the AF360FGZ attached to the camera, and register the channel on the camera.
Turn the camera off and then attach the AF360FGZ to the hot shoe of the camera.
Set the power switch of the flash unit to (WIRELESS).
00_AF360FGZ.book Page 45 Tuesday, June 13, 2006 12:09 PM
(Using the AF360FGZ in Combination with another AF360FGZ)
1
Set the wireless mode switch to (C) or (M).
CONTROL: When using the flash unit attached to the camera as the control flash
MASTER: For using both flash units as main flashes.
Slide down the setting switch to the (yellow dot) to display the channel on the LCD panel.
Press the channel button (CH) and select a channel from 1CH to 4CH.
45