1 | 2 | 3 |
|
| Rib |
XXS XS S M L
Nozzle
Choose an ear cushion size, extra, extra small (XXS) to large (L), which best fits your ears. Selecting the correct ear cushion size helps ensure a comfortable fit and seal to achieve optimal sound quality.
Attach ear cushions to earphone nozzle. Push ear cushion past rib on nozzle so ear cushion will not separate from nozzle during use.
Insert the earphone cable connector into the
3.5mm headphone jack on your iPod® or MP3 player.
4 
5
Gently insert earphone into your ear for a | Store by wrapping cable around fingers; |
good seal: R for right ear; L for left. Never | place earphones inside protective |
remove an earphone from your ear by | pouch. To clean, remove cushion and |
pulling on its cable. | wipe with a clean cloth. |
Troubleshooting
•No sound – ensure that the 3.5 mm earphone connector is fully seated into the iPod/MP3 player headphone jack.
•Weak bass – check ear cushion seal; try another ear cushion size.
•Detached ear cushions – firmly attach ear cushions to earphone nozzle. See step 2 on reverse side.
•Diminished sound quality – remove ear cushions, check for blockage in nozzle, and wipe with a clean cloth.
•Missing ear cushions – go to www.logitech.com for replacements.
Product information:
www.logitech.com
Support: www.logitech.com/support (see phone numbers in this document)
Product registration: www.logitech.com/register
Protect your hearing: Read safety guidelines in Important Information Document.