Nilfisk-ALTO 30 H, 30 M operating instructions Check the volume flow monitor, Acoustic warning

Page 17

4.3Cleaning the filter element

4.3.1Cleaning the filter element " Push&Clean System "

(ATTIX 30- / 50-xx PC)

Only for vacuum cleaning without a filter bag and without a cloth insert filter.

ATTIX 30/50 H/M

english

Filter Cleaning System

If suction performance drops:

1.Turn switch to position "I" (maximum suction power).

2.Close the nozzles or suction hose opening with the palm of your hand.

3.Press the button to start filter

cleaning three times. The re- sulting stream of air removes attached dust from the slats of the filter elements.

4.3.2Cleaning the filter element " XtremeClean " (ATTIX 30- / 50-xx XC)

Only for vacuum cleaning without a cloth insert filter.

After picking up harmless dust using the waste bag.

10 sec .

4.3.3Check the volume flow monitor

Before picking up dust with maxi- mum room concentration values:

To ensure that suction perform- ance is always at its best, the filter element is automatically cleaned during operation. We recommend complete cleaning if the filter element becomes ex- tremely dirty.

1.Check that all the filters are present and properly fitted.

1.Switch off the vacuum clean- er.

2.Close the nozzles or suction hose opening with the palm of your hand.

3.Turn the switch to position „I“ and let the cleaner operate for approx. 10 seconds with the suction hose opening closed.

2.When the motor is run- ning, hold the suction hose shut. An acoustic warning sounds after approx. 1 sec- ond.

4.3.4 Acoustic warning

For safety reasons, an acoustic

low 20 m/s. See section "Trou-

warning sounds if the air speed

bleshooting"

in the suction hose drops to be-

 

15

Page 16 Page 18
Image 17
Page 16 Page 18
Contents Attix 30 H / M / PC / XC Attix 50 H / M / PC / XC Page Contents Instructions English 1 Important safety instructionsSymbols used to mark Storage TransportElectrical connection Extension leadAttix 30/50 H/M Electrical components Picking up liquids RisksHazardous materials Operating elements DescriptionAttix 30- /50-2H / PC/XC Attix 30- /50-2M / PC/XCType of dust Filter bag/waste bag/filter element Before starting the cleanerOEL Insert the safety filter bag HInserting the filter bag M Attix 30/50 H/M Switch Function Position Switching on the vacuum cleaner Switch „ 0-I Switch „ auto-0-I  Switch Function Position Off Auto Auto On/OffAuto-On/Off-Operation auto switch position  Suction power controlAcoustic warning Check the volume flow monitorPicking up dry Substances English 5 Applications and techniquesTechniques After finishing work Switching the vacuumCleaner off and storage Maintenance work 7.2.1 Emptying the dirt tank English 7 MaintenanceMaintenance plan After finishing work Inserting the safety disposal bag Replacing the safety filter bag HRemoving the safety disposal bag Inserting the filter bag Replacing the filter bagRemoving the filter bag Inserting the disposal bag Replacing the disposal bag MRemoving the disposal bag Replacing filter element Push & CleanSystem Removing the filter elementInserting the filter elements Replacing filter element H Xtreme Clean SystemRemoving the filter elements Replacing filter element M Push & Clean System Replacing filter element M XtremeClean System Fault Cause Remedy English 8 TroubleshootingEC declaration of conformity GuaranteeFurther information Optional accessories Technical dataPage Holland

30 H, 30 M specifications

The Nilfisk-ALTO 30 M and 30 H are powerful and efficient vacuum cleaners designed for both professional and industrial applications. These advanced machines are renowned for their exceptional cleaning performance, robust build quality, and user-friendly features, making them ideal for a range of cleaning environments, from small workshops to large commercial spaces.

One of the primary features of the Nilfisk-ALTO 30 M and 30 H is their strong suction power. Equipped with high-performance motors, these vacuums deliver effective cleaning results by easily capturing dust, dirt, and debris. The efficient motor design not only ensures powerful suction but also contributes to lower energy consumption, making these models environmentally friendly.

Both models come with a large capacity dust bag that minimizes the frequency of replacements, which is particularly beneficial for prolonged cleaning sessions. The spacious collection tank allows for uninterrupted cleaning, as operators can focus on the task at hand without needing to stop for emptying frequently. Additionally, the Nilfisk-ALTO 30 M features a durable plastic container designed for easy maintenance and cleaning, while the 30 H variant incorporates a high-efficiency HEPA filter that captures fine dust particles, making it ideal for environments requiring stringent cleanliness standards.

User convenience is a critical aspect of the design in these vacuum cleaners. The ergonomic handle and lightweight structure facilitate easy maneuvering and transport, allowing operators to navigate through tight spaces with ease. The integrated cable storage ensures that the power cord is neatly managed, reducing tripping hazards and enhancing safety.

Innovative technologies, such as the automatic shut-off function in the Nilfisk-ALTO 30 H, play a significant role in enhancing usability. This feature prevents overfilling, protecting the motor and prolonging the life of the vacuum. The models are also designed to be low-noise, making them suitable for use in noise-sensitive areas without causing disruptions.

In summary, the Nilfisk-ALTO 30 M and 30 H vacuum cleaners stand out for their superior suction performance, large capacity, user-centric features, and advanced technologies. Whether for commercial or industrial settings, these vacuums provide reliable and efficient solutions for maintaining clean and healthy work environments. Their combination of power, convenience, and innovative design make them a valuable investment for any cleaning professional.
Top Page Image Contents