Nilfisk-ALTO 30 H, 30 M Transport, Storage, Electrical connection, Extension lead

Page 5

ATTIX 30/50 H/M

english

Dust Class M (medium). The dusts which belong to this class

are: dusts with OEL values1) > 0.1 mg/m³ as well as saw dust. The machine is tested in its entirety by vacuums for this dust class. The maximum degree of permeability is 0.1% and the dis-

posal must be low dust.

The air flow in Safety Vacuum systems has to be strictly controlled to achieve a minimum flow rate of Vmin = 20 m/s in the suction hose.

The vacuum cleaners ATTIX 30-XH and ATTIX 50-XH are suitable to pick up

•dry, nonflammable dust, non flammable liquids, hazadous dusts with OEL values, carcinogenic dusts, dusts containing germs

The vacuum cleaners ATTIX 30-XH PC e ATTIX 50-XH PC are also approved for asbestos abatement (TRGS 519).

The vacuum cleaners ATTIX 30-XM and ATTIX 50-XM are suitable to pick up

•dry, nonflammable dust, non flammable liquids, sawdust and hazadous dusts with OEL values > 0.1 mg/m³

The vacuum cleaners are suitable for commercial use, such as e.g. in

•Hotels, Schools, Hospitals, Factories, Shops, Offices, Hire shops

Any other use is considered as improper use. The manufacturer ac- cepts no liability for any damage resulting for such use. The risk for such use is borne solely by the user.

Proper use also includes proper operation, servicing and repairs as specified by the manufacturer.

Transport

1.

Before transporting the dirt tank, close all the locks.

 

2.

Do not tilt the cleaner if there is liquid in the dirt tank.

 

3.

Do not use a crane hook to lift the cleaner.

 

Storage

1.

Store the appliance in a dry place, protected from frost.

Electrical connection

1.

It is recommended that the vacuum cleaner should be connected

 

 

 

via a residual current circuit breaker.

 

 

2.

Arrange the electrical parts (sockets, plugs and couplings) and

 

 

 

lay down the extension lead so that the protection class is main-

 

 

 

tained.

 

 

 

 

3.

Connectors and couplings of power supply cords and extension

 

 

 

leads must be watertight.

 

 

 

Extension lead

1.

As an extension lead, only use the version specified by the man-

 

 

 

ufacturer or one of a higher quality. See operating instructions.

 

2.

When using an extension lead, check the minimum cross-sec-

 

 

 

tions of the cable:

 

 

 

 

 

 

 

 

 

 

 

 

 

Cable length

 

Cross section

 

 

 

 

 

< 16 A

 

< 25 A

 

 

up to 20 m

 

1.5 mm2

 

2.5 mm2

 

 

20 to 50 m

 

2.5 mm2

 

4.0 mm2

Maintenance, cleaning and During the following work, ensure that dust is not unnecessarily

repairspread around. Wear a P2 bresthing mask.

CAUTION: In the case of asbestos abatement wear additional sin- gle-use clothing.

3

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Attix 30 H / M / PC / XC Attix 50 H / M / PC / XC Page Contents Instructions English 1 Important safety instructionsSymbols used to mark Storage TransportElectrical connection Extension leadAttix 30/50 H/M Electrical components Picking up liquids RisksHazardous materials Operating elements DescriptionAttix 30- /50-2H / PC/XC Attix 30- /50-2M / PC/XCType of dust Filter bag/waste bag/filter element Before starting the cleanerOEL Insert the safety filter bag HInserting the filter bag M Attix 30/50 H/M Switch Function Position Switching on the vacuum cleaner Switch „ 0-I Switch „ auto-0-I  Switch Function Position Off Auto Auto On/OffAuto-On/Off-Operation auto switch position  Suction power controlAcoustic warning Check the volume flow monitorPicking up dry Substances English 5 Applications and techniquesTechniques After finishing work Switching the vacuumCleaner off and storage Maintenance work 7.2.1 Emptying the dirt tank English 7 MaintenanceMaintenance plan After finishing work Inserting the safety disposal bag Replacing the safety filter bag HRemoving the safety disposal bag Inserting the filter bag Replacing the filter bagRemoving the filter bag Inserting the disposal bag Replacing the disposal bag MRemoving the disposal bag Replacing filter element Push & CleanSystem Removing the filter elementInserting the filter elements Replacing filter element H Xtreme Clean SystemRemoving the filter elements Replacing filter element M Push & Clean System Replacing filter element M XtremeClean System Fault Cause Remedy English 8 TroubleshootingEC declaration of conformity GuaranteeFurther information Optional accessories Technical dataPage Holland

30 H, 30 M specifications

The Nilfisk-ALTO 30 M and 30 H are powerful and efficient vacuum cleaners designed for both professional and industrial applications. These advanced machines are renowned for their exceptional cleaning performance, robust build quality, and user-friendly features, making them ideal for a range of cleaning environments, from small workshops to large commercial spaces.

One of the primary features of the Nilfisk-ALTO 30 M and 30 H is their strong suction power. Equipped with high-performance motors, these vacuums deliver effective cleaning results by easily capturing dust, dirt, and debris. The efficient motor design not only ensures powerful suction but also contributes to lower energy consumption, making these models environmentally friendly.

Both models come with a large capacity dust bag that minimizes the frequency of replacements, which is particularly beneficial for prolonged cleaning sessions. The spacious collection tank allows for uninterrupted cleaning, as operators can focus on the task at hand without needing to stop for emptying frequently. Additionally, the Nilfisk-ALTO 30 M features a durable plastic container designed for easy maintenance and cleaning, while the 30 H variant incorporates a high-efficiency HEPA filter that captures fine dust particles, making it ideal for environments requiring stringent cleanliness standards.

User convenience is a critical aspect of the design in these vacuum cleaners. The ergonomic handle and lightweight structure facilitate easy maneuvering and transport, allowing operators to navigate through tight spaces with ease. The integrated cable storage ensures that the power cord is neatly managed, reducing tripping hazards and enhancing safety.

Innovative technologies, such as the automatic shut-off function in the Nilfisk-ALTO 30 H, play a significant role in enhancing usability. This feature prevents overfilling, protecting the motor and prolonging the life of the vacuum. The models are also designed to be low-noise, making them suitable for use in noise-sensitive areas without causing disruptions.

In summary, the Nilfisk-ALTO 30 M and 30 H vacuum cleaners stand out for their superior suction performance, large capacity, user-centric features, and advanced technologies. Whether for commercial or industrial settings, these vacuums provide reliable and efficient solutions for maintaining clean and healthy work environments. Their combination of power, convenience, and innovative design make them a valuable investment for any cleaning professional.
Top Page Image Contents