Russound CA4 Setting Loudness, Setting Source Grouping, Keypad Functions, Keypad usage & Features

Keypad usage & Features

Setting Loudness

1.Enter the User Menu.

2.Press the source button to select Source 3 (lower left) for Loudness. The window will blink.

3.Press the volume up button to turn the feature ON, or the volume down button to turn it OFF. The far right hand volume LED will indicate ON and the far left hand volume LED will indicate OFF.

4.Either press the Source button to go to the next option or exit the User Menu by a 3-second press of the source button or a time-out.

Loudness Setting Mode Source Group Setting Mode

Setting Source Grouping

1.	Enter the User Menu.
2.	Press and release the source button to cycle to and select Source 4 (lower
	right). The window will blink.
3.	Pressing the volume up button will activate the feature and pressing the
	volume down button deactivates the feature. The far right hand volume
	LED will indicate ON and the far left hand volume LED will indicate OFF.

Keypad Functions

Power ON/OFF: A press and release of the power, source or volume up / down buttons will turn the keypad ON. A press and release of the power button will turn the keypad and the backlighting OFF. Note: If there are other keypads ON in the system the power button will remain lit.

Volume Adjustment: Upon initial powering of the keypad, the volume will automatically ramp up to the factory set turn-on volume level. Pressing the volume up or down buttons will change the volume accordingly. Volume levels will be indicated by the LEDs above the volume up button. Hold the buttons to ramp the volume up or down accordingly.

Source Selection: A press and release of the source button will cycle through the sources. The selected source will be backlit on the keypad.

All ON: A press and hold of the power button (3-seconds) while the zone is already in the ON state will turn all keypads ON (if enabled to respond). The volume LEDs will light up from the center and ramp outward. Usage Note: If initiating an All ON command, all other powered zones will automatically be placed into a Party Mode as non-Masters and will not have independent source control. The initiating keypad is the Master and will need to be turned off to discontinue the Party Mode before source control can be available for other zones.

All OFF: A press and hold of the power button (3-seconds) while the zone is in the OFF state will turn all keypads OFF. The volume LEDs will light up from the center and ramp outward. The backlighting on all keypads will turn off and the system will be in Standby mode.

Source 1	Source 2
Source 3	Source 4

4.	Either press the Source button to go to the next option or exit the User
	Menu by a 3-second press of the source button or a time-out.
5.	Go to another keypad that is connected to the same controller and repeat
	the procedure so that these zones will be linked and listening to the same
	source. Any source changes on any of the linked keypads will be tracked
	and updated on all source linked keypads. Volume control remains
	independent as well as zone ON and OFF. Only zones connected to the
	same controller can be source grouped.

Press Volume Up or Down buttons to change volume

Power

Volume Indicators

Press and release Source

button to cycle through

sources

Press and release of the Source, Volume Up, Volume Down, or Power buttons will turn the keypad ON

Russound CA4 System Installation Manual 7