Russound installation manual Keypad usage & Features, CA4-KPUser Menu, Setting Bass and Treble

Keypad usage & Features

CA4-KP User Menu

The User Menu allows the user to adjust the audio properties and features of a particular zone. The audio features that can be adjusted are: Bass, Treble, and Loudness. Additional features that are selectable are Source Grouping, and All ON Participation. Source Grouping allows linked zones to listen to the same source and follow any source changes on those linked zones. When All ON participation is enabled, an All ON command will turn on any enabled zones and allow the initiating keypad to act as the Master keypad and control the source selection for all zones that are powered on.

To enter the User Menu, press and hold the Source button for 3 seconds when the keypad is powered on. The Source windows will blink to indicate the option ready for adjustment. Another 3-second press and hold of the Source button (or a 9-second time-out) will return the keypad to regular operation.

The top left (Source 1) button will temporarily blink to indicate “Bass" is ready for adjustment. Subsequent presses of the Source button will toggle through Treble (Source 2), Loudness (Source 3), Source Grouping (Source 4) and All ON Participation (all four Sources lit).

Once an option is selected, the Volume Up/Down buttons are used to adjust settings. The volume indicator LEDs temporarily light to show the option setting. A 3-second press and hold, or a 9-second time-out will return the keypad to normal operation.

Setting Bass and Treble

1.Enter the User Menu.

2.Select Source 1 (upper left) for Bass or Source 2 (upper right) for Treble. The windows will blink to indicate the option for adjustment.

3.Press the volume up or down to adjust the settings. The LEDs above the volume up button will indicate the change. The middle LED will flash when flat.

4.Either press the Source button to go to the next option or exit the User Menu by a 3-second press of the source button or a time-out.

Source window will blink to indicate the	Source 1	Source 2
option that is ready for adjustment	Source 3	Source 4

Bass	Treble
Loudness	Source Grouping
	All Sources Lit
Press Volume Up or	- All ON Participation
Down buttons to	Hold Source button to
adjust setting
	enter or exit User Menu
	Press Source button to
	cycle through the menu
	options

Bass Setting Mode Treble Setting Mode

6 Russound CA4 System Installation Manual