Keypad usage & Features
Setting All ON Participation / Party Mode
Enable / Disable All ON Participation
This setting will allow the keypad to respond to an All ON command. The default setting is All ON Participation Enabled.
1.Enter the User Menu.
2.Press and release the source button, until all the source buttons are flashing. It will cycle through each individual source and then all sources will flash.
3.Press the Volume Up button to turn the feature ON, or the Volume Down button to turn the feature OFF. The far right hand volume LED will be lit to indicate that the keypad is enabled to respond, or the far left hand volume LED will indicate that the keypad will not respond to the All ON command.
4.Either press the Source button to go to the next option or exit the User Menu by a
All ON Participation | All ON Participation |
Disabled | Enabled |
Conditions/ Notes
•If the keypad is disabled to respond to the All ON command and is OFF when the All ON command is issued, it will not respond to the command. If it is turned ON while Party Mode is active on the system or was ON prior to the All ON command being initiated, it will automatically be entered into Party Mode as a
•If the keypad is enabled to respond to the All ON Participation command and is OFF when the All ON command is issued, it will turn on and enter into Party Mode as a
•The keypad issuing the All ON command will be the master keypad and be able to control the source selection for any other active zones. The power button will blink slowly tree times to indicate the Master status and then will remain lit. Volume control and Power On/Off remain independent for each keypad.
•
•
•Turning the Master keypad OFF will exit Party Mode, and allow the other zones to regain source control.
•A
8 | Russound CA4 System Installation Manual |