English / B-7, Using Attachments | Nilfisk-Advance America AX 310

FIGURE 6

ENGLISH / B-7

OPERATING THE MACHINE

1Follow the instructions in the Preparing the Machine for Use section of this manual.

2See Figure 5. Rotate the Brush Storage Position Lever (9) forward to release the machine from the storage position and lower the brush to the ﬂoor.

FIGURE 5

3Loosen the Handle Height Adjustment Knobs (C) and adjust the handle height to the most comfortable position for the operator. Re-tighten the knobs once the desired height is reached.

4Plug the machine into a properly grounded outlet. To start the vacuum motor, and enable the solution pump turn the Power Switch (E) to the ON

(I) position.

5Continually hold the Solution/Brush Motor Switch (1) to turn on the brush motor and dispense solution. Once the Solution/Brush Motor Switch (1) is released the brush motor will turn off and the solution ﬂow will stop. The vacuum motor will continue to run as long as the power switch is in the ON (I) position.

6Begin cleaning by pulling the machine along in a straight line and overlap each pass by 2 inches (5 cm). Release the Solution/Brush Motor Switch

(1) prior to turns to ensure complete extraction of solution from carpet.

7Watch the ﬂuid entering the recovery tank Dome Lid View Port (4). If there is a large amount of suds in the recovery tank, add a defoamer chemical to the recovery tank.

CAUTION!

Empty the recovery tank before the ﬂuid or foam enters the vacuum motor.

If there is little or no ﬂuid entering the recovery tank, check the Solution Drain Hose / Level Indicator (A), the solution tank may be empty. Reﬁll the solution tank with water and the proper ratio of cleaning chemical. Empty the recovery tank each time the solution tank needs to be reﬁlled.

8When the ﬂuid reaches a full level the recovery tank must be emptied.

CAUTION!

Do not continue to extract once the recovery tank becomes full.

The machine can continue to dispense solution, and will continue to pick up solution even though the recovery tank may be full. This would result in damage to the vacuum motor. If using the extractor to pick up solution already on the ﬂoor without dispensing solution be sure to frequently check the level of solution in the recovery tank. Open the recovery tank dome lid to check the level of solution in the recovery tank.

9When the operator wants to stop cleaning or the recovery tank is full, release the Solution/Brush Motor Switch (1). Then turn the power switch OFF (O) and unplug the machine. Coil up the cord and wrap around the Handle Assembly (B).

10Push the machine to a designated waste water “DISPOSAL SITE” and empty the recovery

tank. To empty, swing open the recovery tank lid and remove the recovery tank from machine. Grasp the recovery tank as shown in Figure 6 and drain. Reﬁll the solution tank and continue cleaning.

USING ATTACHMENTS

To use accessory tools, disconnect the recovery hose at the Recovery Tank Dome Lid (3). Attach the accessory’s recovery hose to the Dome Lid in place of the machine’s recovery hose. Attach the accessory’s solution hose (waterline) to the machine’s Accessory Solution Port (F).

See your Nilﬁsk Distributor for accessories that may be used with the AX 310.

FORM NO. 56041672 - AX 310 - B-7

AX 310 specifications

The Nilfisk-Advance America AX 310 is a powerful and versatile floor cleaning machine designed for commercial applications where durability, efficiency, and ease of use are paramount. Combining advanced technology with user-friendly features, the AX 310 enables operators to achieve optimal cleaning results while minimizing downtime and maintenance costs.

One of the standout features of the AX 310 is its compact design, which makes it ideal for cleaning tight spaces, such as retail stores, hospitals, and schools. Despite its smaller form factor, the machine is equipped with a significant cleaning path, allowing for thorough cleaning in a shorter amount of time. The powerful brush motor ensures efficient dirt and debris removal, while the robust suction system guarantees effective water recovery.

The AX 310 is powered by an efficient battery system, providing the flexibility for cord-free operation. This is particularly beneficial in large areas or environments where trip hazards from power cords could pose safety risks. The machine offers a runtime that caters to even the most demanding cleaning schedules, enabling users to cover vast areas without interruptions.

Incorporating advanced technologies, the AX 310 features an intuitive control panel that simplifies operation. Users can easily adjust settings and monitor battery levels at a glance, ensuring that cleaning tasks can be completed efficiently. The machine also offers various cleaning modes tailored for different surfaces and cleaning requirements, making it highly adaptable for different applications.

Another notable characteristic of the AX 310 is its eco-friendly design. The machine operates quietly, reducing noise pollution and allowing for use in noise-sensitive environments. Additionally, its low water consumption levels contribute to sustainability efforts, making it an excellent choice for organizations aiming to minimize their environmental impact.

Built with high-quality materials and components, the AX 310 is designed for durability. Its robust construction means that it can withstand the rigors of daily commercial use, providing a long lifespan with minimal maintenance. This reliability not only enhances productivity but also ensures that operators can focus on their cleaning tasks without worrying about frequent breakdowns.

In conclusion, the Nilfisk-Advance America AX 310 combines compact design, efficient cleaning capabilities, and advanced technology to deliver a superior cleaning solution for commercial environments. Its user-friendly features and eco-conscious design make it an ideal choice for businesses looking to improve their cleaning operations while adhering to sustainability practices.