Nilfisk-Advance America AX 310 manual English / B-9

Page 23

ENGLISH / B-9

SPRAY NOZZLE MAINTENANCE

FIGURE 8

Remove the Spray Nozzle (J) once a month. See Figure 8. Soak the nozzle overnight in vinegar

to remove chemical deposits.

 

SOLUTION SCREEN MAINTENANCE

 

Once a week (or more often if necessary), clean the Solution Screen (7). Drain the solution tank.

 

Lift the recovery tank from the machine and set it off to the side. See Figure 9. Tip the machine

 

onto its side. Loosen the Hose Clamp (K), remove the Hose (L) from Hose Barb (M). Unthread

 

Hose Barb (M) from the machine to access Filter (7).

 

POWER CORD MAINTENANCE

 

Once a week (or more often if necessary), check the power cord for cracked or damaged insulation,

 

exposed wires in the cord or plug, and damaged or missing ground pin. Repair or replace damaged

 

cord or plug immediately. If the supply cord is damaged, it must be replaced by a special cord or

 

assembly available from the manufacturer or its service agent.

 

POWER BRUSH MAINTENANCE

 

Check the brush daily. Remove any built-up string, hair or carpet fibers. When the machine is not in use it should be placed in the storage position (Figure 7). This will prevent the brush from taking a “set”, and will increase the brush life and maintain the performance of the brush.

REMOVING THE BRUSH

CAUTION!

Turn the power switch OFF (O) and unplug the machine, before changing the brushes.

1Empty the solution tank. Swing open the recovery tank dome lid. Lift the recovery tank off the machine, empty it and set the tank off to the side.

2Tip the machine onto its side.

3See Figure 9. Rotate the brush until the Drive Lug (N) is in a position where one of the two fins is facing out (drive lug is perpendicular to the bottom of the base).

4Grab the brush at the end with the Brush Retainer Clip (P) and pull straight out.

5Install a new brush at the drive lug end first then push in the other brush end until it snaps into the retainer clip.

N

P

FIGURE 9

7

M

K

L

FORM NO. 56041672 - AX 310 - B-9

Page 22 Page 24
Image 23
Page 22 Page 24
Contents Instructions for USE İçindekiler Ii / Türkçeİsİm Plakasi Türkçe / A-1Gİrİş Parçalar VE ServİsTürkçe Önemlİ Güvenlİk ÖnlemlerİUyari BU Talİmatlari SaklayinTopraklama Talİmatlari TehlİkeTürkçe / A-3 Makinenizi Taniyin Makinenizi Taniyin Devam Türkçe / A-5Temİzleme Plani DİkkatŞekİl AX 310’U Kallinmadan Önce Halinin ÖN SpreylenmesİAksesuarlarin Kullanilmasi Türkçe / A-7Makİnenİn Çaliştirilmasi ŞekİlVakum Pabucu Bakimi ÖnemlİMakİneyİ Kullandiktan Sonra Bakim ProgramiTürkçe / A-9 Zayif SU Toplamasi 10 / TürkçeSorun Gİderme Devre Kesİcİnİn ArizalanmasiPage Ii / English Table of ContentsNameplate Parts and ServiceEnglish / B-1 IntroductionEnglish Important Safety InstructionsGrounding Instructions English / B-3Know Your Machine English / B-5 PRE-SPRAYING the Carpet Preparing the Machine for USE Filling the Solution TankBefore Using the AX Plan for CleaningOperating the Machine Using AttachmentsEnglish / B-7 Vacuum Shoe Maintenance After Using the MachineMaintenance Schedule English / B-9 Tripping the Circuit Breaker TroubleshootingInadequate Solution Flow 10 / EnglishPage Page Type AX310 Nilfisk-Advance A/S

AX 310 specifications

The Nilfisk-Advance America AX 310 is a powerful and versatile floor cleaning machine designed for commercial applications where durability, efficiency, and ease of use are paramount. Combining advanced technology with user-friendly features, the AX 310 enables operators to achieve optimal cleaning results while minimizing downtime and maintenance costs.

One of the standout features of the AX 310 is its compact design, which makes it ideal for cleaning tight spaces, such as retail stores, hospitals, and schools. Despite its smaller form factor, the machine is equipped with a significant cleaning path, allowing for thorough cleaning in a shorter amount of time. The powerful brush motor ensures efficient dirt and debris removal, while the robust suction system guarantees effective water recovery.

The AX 310 is powered by an efficient battery system, providing the flexibility for cord-free operation. This is particularly beneficial in large areas or environments where trip hazards from power cords could pose safety risks. The machine offers a runtime that caters to even the most demanding cleaning schedules, enabling users to cover vast areas without interruptions.

Incorporating advanced technologies, the AX 310 features an intuitive control panel that simplifies operation. Users can easily adjust settings and monitor battery levels at a glance, ensuring that cleaning tasks can be completed efficiently. The machine also offers various cleaning modes tailored for different surfaces and cleaning requirements, making it highly adaptable for different applications.

Another notable characteristic of the AX 310 is its eco-friendly design. The machine operates quietly, reducing noise pollution and allowing for use in noise-sensitive environments. Additionally, its low water consumption levels contribute to sustainability efforts, making it an excellent choice for organizations aiming to minimize their environmental impact.

Built with high-quality materials and components, the AX 310 is designed for durability. Its robust construction means that it can withstand the rigors of daily commercial use, providing a long lifespan with minimal maintenance. This reliability not only enhances productivity but also ensures that operators can focus on their cleaning tasks without worrying about frequent breakdowns.

In conclusion, the Nilfisk-Advance America AX 310 combines compact design, efficient cleaning capabilities, and advanced technology to deliver a superior cleaning solution for commercial environments. Its user-friendly features and eco-conscious design make it an ideal choice for businesses looking to improve their cleaning operations while adhering to sustainability practices.
Top Page Image Contents