Monte Carlo Fan Company 5STR52 owner manual Phillips Screwdriver Pliers, Step Ladder

Page 2
TOOLS REQUIRED Wire Cutters
1.
2.
3.
4.

SAFETY TIPS

WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS,

OBSERVE THE FOLLOWING: READ AND SAVE THESE INSTRUCTIONS

Installation work and electrical wiring must be done by qualified person(s) in accordance with applicable codes an 70-1999), including fire-rated construction.

Use this unit only in the manner intended by the manufacturer. If you have any questions contact the manufacturer.

After making the wire connections, the wires should be spread apart with the grounded conductor and the equipment-grounding con- ductor on one side of the outlet box and ungrounded conductor on the other side of the outlet box.

Before you begin installing the fan, Switch power off at Service panel and lock service disconnecting means to prevent power from being switched on accidentally. When the service disconnecting means cannot be locked, securely fasten a prominent warning device, such as a tag, to the service panel.

5. Be cautious! read all instructions and safety information before installing your new fan. Review the accompanying assembly diagrams.

6. When cutting or drilling into wall or ceiling, do not damage electrical wiring and other hidden utilities.

7. Make sure the installation site you choose allows the fan blades to rotate without any obstructions. Allow a minimum clearance of 7 feet from the floor to the trailing edge of the blade.

8. To reduce the risk of fire, electric shock, or personal injury, mount to outlet box or supporting system acceptable for fan support. (Mounting must support at least 35 lbs.)

9. Do not bend blade holders during installation to motor, balancing or during cleaning. Do not insert foreign object between rotating blades.

10. Attach the mounting bracket using only the hardware supplied with the outlet box.

11. To reduce the risk of fire or electric shock, do not use this fan with any solid state fan speed control device, or variable speed control.

12. If this unit is to be installed over a tub or shower, it must be marked as appropriate for the application.

13. NEVER place a switch where it can be reached from a tub or shower.

14. The combustion airflow needed for safe operation of fuel-burning equipment may be affected by this unit’s operation. Follow the heating equipment manufacturer’s guideline safety standards such as those published by the National Fire Protection Association (NFPA), and the American Society for Heating, Refrigeration and Air Conditioning Engineers (ASHRAE) and the local code authorities.

15. Before servicing or cleaning unit, Switch power off at Service panel and lock service disconnecting means to prevent power from being switched on accidentally. When the service disconnecting means cannot be locked, securely fasten a prominent warning device, such as a tag, to the service panel.

 

 

Phillips Screwdriver

Pliers

 

1

 

 

2

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Before you begin installing the fan, Switch power off

 

 

 

Before installing this fan

make sure the outlet

 

 

 

 

 

 

 

at Service panel and lock service disconnecting means

 

 

box is properly installed to the house structure.

 

 

to prevent power from being switched on accidentally.

 

 

To reduce the risk of fire, electric shock, or per-

 

 

When the service disconnecting means cannot be

 

 

sonal injury, mount to outlet box or supporting

 

 

locked, securely fasten a prominent warning device,

 

 

system acceptable for fan support.

 

 

such as a tag, to the service panel.

 

 

(Mounting must support at least 35 lbs.)

 

 

 

 

 

5

 

 

 

 

4

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Remote Transmitter Dip swtiches

 

 

Remote Receiver Dip switches

 

 

Set dip switches on the Remote Transmitter and Remote

 

 

 

 

Receiver to the same settings. This must be done so the

 

 

units will communcate properly. If you have other fans you

 

If using the light kit find wires from light and

can set to control from one transmitter by setting both

 

fan body. Plug wires together as follows.

receivers the same as the transmitter. If you have more

 

Connect blue wire from fan to black wire from

than one fan with remote. You can set the dip switches to

 

light. Connect white wire from fan to white wire

different positiosns to have seperate control.

 

from light.

 

 

 

Step Ladder

3

Install the Mounting Bracket to the Outlet box.

Use only the screws provided with the out- let box.

6

Slotted fitter arms

Use caution with the sloted fitter arms, do not force the fitter arms in assembling when using the light kit. Screw in the 2 allen screws then place switch housing cap with slots as shown on the 2 screws and twist.

Page 1 Page 3
Image 2
Page 1 Page 3
Contents Owner’s Manual Use only the screws provided with the out- let box Phillips Screwdriver PliersStep Ladder Deforming blade arms Create problems of blade pitch deviation orBlades. Any pressure on blade arms or blades Canadian mounting only Install cotter pin into cross pin to secureSafety Cable Lag Screw Canopy Yoke coverButtons For lights Fan on / off Fan reverse Fan speedControl Not USE a Solid State variable speed control

5STR52 specifications

Monte Carlo Fan Company has established itself as a leader in the ceiling fan industry, known for its commitment to quality, style, and technology. One of its standout products is the 5STR52 ceiling fan, which combines aesthetic appeal with advanced functionality, making it an excellent choice for both residential and commercial applications.

The 5STR52 features a sleek modern design, characterized by its five elegantly crafted blades that create a perfect balance between form and function. Its 52-inch blade span is ideal for medium to large rooms, providing optimal airflow while enhancing the overall decor of the space. The fan is available in a variety of finishes, allowing consumers to select an option that complements their interior design.

One of the main features of the 5STR52 is its WhisperWind motor technology. This patented motor delivers powerful airflow while ensuring that the fan operates quietly. This makes it suitable for bedrooms, living rooms, and offices where noise levels need to be kept to a minimum. The motor is not only efficient but also energy-saving, helping to reduce electricity costs over time.

The fan also incorporates a reversible motor feature, which allows users to switch the direction of the blades. In the summer, the blades can spin counterclockwise to create a cool breeze, while in the winter, they can rotate clockwise to circulate warm air that tends to rise, thus optimizing year-round comfort.

In terms of control options, the 5STR52 offers versatility with multiple settings. It can be operated via a pull chain, allowing for easy adjustments to fan speed and light settings. For those who prefer a more modern approach, Monte Carlo provides the option to integrate a remote control system or smart home technology, enabling users to adjust the fan from across the room or via mobile devices.

The 5STR52 is not only designed for aesthetics and performance but also includes LED lighting options. The integrated LED light kit provides energy-efficient illumination with adjustable brightness levels, making it a practical addition for rooms requiring lighting without the need for additional fixtures.

In summary, the Monte Carlo Fan Company 5STR52 ceiling fan is a perfect blend of style, performance, and technology. With its sleek design, WhisperWind motor, reversible motor feature, versatile control options, and LED lighting, it meets the needs of modern consumers seeking both comfort and elegance in their living spaces.
Top Page Image Contents