Monte Carlo Fan Company 5KC48, 5SG52 owner manual Troubleshooting Guide, Trouble Suggested Remedy

Page 5

Page 5 – 5KC48/5SG52-English CUL

TROUBLESHOOTING GUIDE

If you have difficulty operating your new ceiling fan, it may be the result of incorrect assembly, installation, or wiring. In some cases, these installation errors may be mistaken for defects. If you experience any faults, please check this Trouble Shooting Chart. If a problem cannot be remedied, or you are experiencing difficulty in installation, please call our Customer Service Center at the number printed on your parts list insert sheet.

Warning: Before servicing or cleaning unit, Switch power off at Service panel and lock service disconnecting means to prevent power from being switched on accidentally. When the service disconnecting means cannot be locked, securely fasten a prominent warning device, such as a tag, to the service panel.

TROUBLE

SUGGESTED REMEDY

 

 

1. If fan does not start:

2. If fan sounds noisy:

3. If fan wobbles:

Touching

Ceiling

Figure 1

Blade Tip Down:

Fan Blade

Blade Brackets

Blade Tip Up:

Fan Blade

Figure 2

1.Check main and branch circuit fuses or circuit breakers.

2.Check line wire connections to fan and switch wire connections in switch housing. CAUTION: Make sure main power is turned off.

3.Make sure forward/reverse switch is firmly in up or down position. Fan will not operate when switch is in the middle.

4.Make sure that shipping stabilizer tabs have been removed from motor (see installation step #13).

1.Check to make sure all screws in motor housing are snug (not over tightened).

2.Check to make sure the screws which attach the fan blade holder to the motor are tight.

3.Check to make sure wire nut connectors in switch housing are not rattling against each other or against the interior wall of the switch housing.

CAUTION: Make sure main power is turned off before entering switch housing.

4.If using an optional Ceiling Fan Light Kit, check to be sure the screws securing the glassware are finger tight. Check to be sure light bulb is tight in socket and not touching glass shade(s). If vibration persists from glass, remove glass and install a 1/4" wide rubber band on glass neck to act as an insulator. Replace glass and tighten screws against rubber band.

5.Some fan motors are sensitive to signals from Solid State variable speed controls. DO NOT USE a Solid State variable speed control.

6.Allow "break-in" period of 24 hours. Most noises associated with a new fan will disappear after this period.

1.Make sure that the ridge of the canopy engages the notch in the downrod ball. (See illustration in Step #6 of Downrod Mount installation).

2.Check that all blades are screwed firmly into blade holders.

3.Check that all blade holders are tightened securely to motor.

4.Make sure that canopy and mounting bracket are tightened securely to ceiling junction box and junction box is mounted firmly to ceiling joist.

5.Most fan wobble problems are caused when blade levels are unequal. Check this level by selecting a point on the ceiling above the tip of one of the blades. Measure this distance as shown in Figure 1. Keeping measure within 1/8", rotate the fan until the next blade is positioned for measurement. Repeat for each blade. If all blade levels are not equal, you can adjust blade levels by the following procedure. To adjust a blade tip down, insert a washer (not supplied) between the blade and blade holder at the screw closest to the motor (Figure 2). To adjust a blade tip up, insert washer (not supplied) between the blade and blade holder at the two screws farthest from the motor (Figure 2).

6.If blade wobble is still noticeable, interchanging two adjacent (side by side) blades can redistribute the weight and possibly result in smoother operation.

4.If light does not work: 1. Check blue wire from fan to make sure it is connected to hot wire from house.

2.Check for loose or disconnected wires in fan switch housing.

3.Check for loose or disconnected wires in light kit.

4.Check for faulty light bulbs.

CAUTION: Make sure main power is turned off before entering switch housing.

CUSTOMER SERVICE CENTER:

2900 WEST SEMINARY DR.

FORT WORTH, TEXAS 76133

1-800-519-4092

© Copyright 2001, Monte Carlo Fan Co.,REV.0, 4/30/01

Image 5
Contents For 5KC48 and 5SG52 Fans Safety Tips InstallationCanadian Mounting System Insert Canadian Safety TipsStandard Wiring Option Trouble Suggested Remedy Troubleshooting Guide6 5KC48/5SG52-English CUL REV.0 4/30/01

5KC48, 5SG52 specifications

The Monte Carlo Fan Company 5KC48,5SG52 ceiling fan is an excellent choice for those seeking to enhance both the aesthetics and functionality of their indoor spaces. This model epitomizes a perfect blend of style and technology, making it a favorite among homeowners and interior designers alike.

The 5KC48,5SG52 features a sleek, modern design that fits seamlessly with various décor styles, ranging from contemporary to traditional. One of the standout characteristics of this fan is its impressive 48-inch blade span, making it ideal for medium-sized rooms, such as bedrooms, living rooms, or dining areas. The blades are crafted from high-quality materials that not only ensure durability but also provide a smooth and effective airflow.

This ceiling fan is equipped with a powerful yet energy-efficient motor that operates quietly, allowing you to enjoy a cool breeze without disruptive noise. Its versatility is further enhanced by the fan's three-speed settings, which enable you to customize the airflow according to your comfort levels, whether it's a gentle breeze or a stronger draft.

Another remarkable feature of the Monte Carlo 5KC48,5SG52 is its integrated lighting options. Many variants of this model come with an energy-efficient LED light kit, offering bright illumination while consuming less electricity. This not only adds convenience to your space but also helps reduce energy costs.

Installation of the 5KC48,5SG52 is straightforward, thanks to its user-friendly design, making it accessible for DIY enthusiasts. Additionally, it is adaptable for both standard and vaulted ceilings, providing versatility in placement and ensuring optimal airflow wherever it is installed.

The Monte Carlo Fan Company emphasizes sustainability in its products, and the 5KC48,5SG52 is no exception. By using eco-friendly materials and energy-efficient technologies, this ceiling fan contributes to reduced power consumption, making it an environmentally responsible choice.

With its stylish aesthetic, versatile features, and advanced technologies, the Monte Carlo Fan Company 5KC48,5SG52 ceiling fan is an excellent investment for anyone looking to improve their indoor air quality while adding a touch of elegance to their home. Its combination of form and function makes it a standout option in the market, ensuring comfort and style for years to come.