Lifebreath 200MAX RX, 155ECM, 155MAX RX Model 200MAX, Dimensions 200MAX inches mm

Page 9

Model 200MAX

ENGINEERING DATA

THERMALLY CONDUCTIVE, PATENTED ALUMINUM CORE

The cross-flow heat recovery core transfers heat between the two airstreams. It is easily removed for cleaning or service.

MOTORS AND BLOWERS

Each air stream has one centrifugal blower driven by a common PSC motor. 5 speed fan operation. 120 VAC, 1.4 Amps.

FILTERS

Washable air filters in exhaust and supply air streams.

MOUNTING THE HRV

Four threaded inserts at corners of case designed to accept four reinforced polyester straps that are supplied with the unit.

DEFROST

Recirculating damper defrost system.

DEHUMIDISTAT

Adjustable Internal Dehumidistat.

CASE

Twenty gauge prepainted galvanized steel (G60) for superior corrosion resistance. Insulated to prevent exterior condensation. Drain connections 2

-1/2" (12 mm) OD.

CONTROLS

ControlAir 15 - Standby/ON mode, 20 ON/ 40 OFF mode, Recirculation mode (on compatible units), (each mode has 5 speeds). Control pad can be removed from HRV and remotely mounted.

Weight 71 lbs. (32.5 kg) Shipping Weight 73 lbs. (33.5 kg)

DIMENSIONS 200MAX inches (mm)

PERFORMANCE

HVI CERTIFIED

Net supply airflow in cfm (L/s) against external static pressure

E.S.P

cfm

L/s

@ 0.1” (25 Pa)

232

(109)

@ 0.2” (50 Pa)

223

(105)

@ 0.3” (75 Pa)

215

(102)

@ 0.4” (100 Pa)

195

(92)

@ 0.5” (125 Pa)

189

(89)

Maximum Temperature Recovery

81%

 

 

Sensible Effectiveness

74%

@ 117 cfm (55 L/s) (CSA C439M)

Sensible Efficiency

 

 

@ 117 cfm (55 L/s)

32°F (0°C)

65%

Sensible Efficiency

 

 

@ 117 cfm (55 L/s)

-13°F (-25°C)

66%

 

 

 

VAC @ 60HZ

 

120

 

 

 

WATTS / Low speed

 

87

 

 

WATTS / High speed

164

 

 

 

Amp rating

 

1.4

FRESH AIR

STALE AIR

FROM OUTSIDE

FROM INSIDE

RECIRCULATING

FILTERS

 

 

 

 

 

DEFROST

 

 

 

DAMPER

 

 

 

CORE

 

BLOWERS

 

 

MOTOR

 

 

 

(483)

 

 

19"

STALE AIR

 

FRESH AIR

 

TO OUTSIDE

 

TO INSIDE

 

 

33 5/8"

 

 

CONDENSATE DRAINS

(850mm)

BALANCING DAMPER

 

*NOTE: Front clearance of 25 inches (635 mm) is recommended

for servicing unit.

143/4"

(375)

*All Duct Connections 6" (150mm)

OPTIONS

99-104 Digital Electronic Timer - 20/40/60 min.

99-109 Air Sentry™ Air Quality Monitor designed to accept remotely

mounted Control Pad

99-250 Ventilation Dehumidistat - Dehumidistat designed to accept remotely mounted Control Pad.

99-163 Duct Heater w/ Electronic SCR Thermostat, 1 Kw, 6” (150mm) 99-164 Duct Heater w/ Electronic SCR Thermostat, 2 Kw, 6” (150mm) 99-186 Weatherhoods, Two - 6” (150mm) c/w 1/4” (6mm) mesh screen

WARRANTY

Units carry a LIFETIME warranty on the heat recovery core and a 5 year replacement parts warranty.

200MAX FANCURVE

5 HIGH SPEED*

 

225

 

 

 

 

4

MEDIUM HIGH SPEED

 

200

 

 

 

 

3

MEDIUM SPEED

 

 

 

*Manufacturers Data

2

MEDIUM LOW SPEED

 

 

 

 

 

175

5

 

1

LOW SPEED

 

(cfm)

 

 

 

 

 

 

 

150

4

 

 

 

 

 

 

 

3

 

 

 

 

 

 

Flow

125

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2

 

 

 

 

 

 

Air

100

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1

 

 

 

 

 

 

 

75

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

50

 

 

 

 

 

 

 

 

25

 

 

 

 

 

 

 

 

0.3

0.4

0.5

0.6

0.7

0.8

0.9

1.0

Static Pressure (inH20)

All units conform to

CSA and UL standards.

TI-99-NE

9

0904

Image 9
Contents 200MAX 155MAX 155ECMInstallation Table of ContentsMaintenance WarrantyWhy transfer moisture in the summer cooling season? Where do you use an ERV instead of an HRV?So why use an ERV? What is the maintenance?Page Model 95MAX Dimensions 95MAX inches mmModel 155MAX Dimensions 155MAX inches mmModel 155ECM Dimensions 155ECM PerformanceModel 155MAX RX Dimensions 155MAX RX inches mmModel 200MAX Dimensions 200MAX inches mmModel 200MAX RX Dimensions 200MAX RX inches mmModel Maxtop Dimensions Maxtop inches mmModel 195DCS Dimensions 195DCS inches mmModel 300DCS Dimensions 300DCS inches mmModel 200ERV Dimensions 200ERV inches mmModel 200ERVD Dimensions 200ERVD inches mmFunction and Controls Operating the ControlAir GlossarySelf Test Automatic Defrost OperationModes of Operation LED Indication Which Mode of Operation is Best for Me?20 on / 40 OFF To select speedControlAir Control Pad Mounted in the Control ModuleDigital Electronic Timer DET Optional TimersCrank Timer Ventilation DehumidistatUsing the Dehumidistat Round port bent to oval MAX Port SpecificationsVariable Port Location MAX Air FlowConnecting Appliances to the HRV/ERV Installation LocationInstalling the Drain Line and P-Trap MountingWarmside Ducting Direct Connection to Furnace Ductwork Supply Air DuctingIndirect Connection to Ductwork Stale Air Exhaust SystemPartially Dedicated System Installation DiagramsSimplified Installation Supply/Return Method Fully Dedicated System Pitot Tube Air Flow Balancing Balancing ProcedureHard/Rigid Ducting Balancing Collar InstructionsTo install the clean core Clean Core Twice a Year a open access doorGeneral Maintenance Twice a Year Cleaning the FansMotors Maintenance Free Troubleshooting your HRV/ERV System Symptom Cause SolutionWire Residential Wiring Diagram For All Models Except 155ECM Residential Wiring DiagramResidential Wiring Diagram 155ECM Residential Wiring Diagram

200MAX RX, 155MAX RX, 155ECM specifications

Lifebreath 200MAX RX, 155MAX RX, and 155ECM are high-performance heat recovery ventilators designed to enhance indoor air quality while maximizing energy efficiency in residential and commercial spaces. These systems are equipped with advanced technologies that ensure fresh air circulation, reduced energy consumption, and improved overall comfort.

The Lifebreath 200MAX RX is a robust unit that offers a balanced air exchange system, delivering up to 200 CFM (cubic feet per minute) of airflow. This model features a high-efficiency heat exchanger that transfers heat from outgoing stale air to incoming fresh air, significantly reducing energy costs associated with heating and cooling. The unit is designed for larger spaces, making it an ideal choice for homes with open floor plans or commercial environments requiring substantial ventilation.

The 155MAX RX is tailored for medium-sized spaces, providing up to 155 CFM of airflow. It incorporates a similar high-efficiency heat recovery process as the 200MAX RX, ensuring optimal temperature retention without compromising air quality. This unit is equipped with a variable speed motor that allows users to adjust airflow settings according to their specific needs, facilitating better control over indoor climate conditions.

On the other hand, the Lifebreath 155ECM is notable for its energy conservation capabilities, featuring an electronically commutated motor (ECM) that offers superior efficiency and quieter operation. This model is particularly advantageous for those looking to minimize energy consumption while maintaining effective ventilation. The ECM technology allows for precise adjustments to the airflow, adapting to changes in indoor air quality needs seamlessly.

All three models are designed with user-friendly features, including easy-access filters for simple maintenance and cleaning. Their compact design allows for flexible installation in various areas, including attics, basements, or utility closets. Lifebreath products also come equipped with control systems that enable users to monitor and manage air quality more effectively.

In conclusion, the Lifebreath 200MAX RX, 155MAX RX, and 155ECM are exceptional choices for those seeking to improve their indoor air quality while enhancing energy efficiency. With their innovative technologies, capacity for heat recovery, and ease of maintenance, these heat recovery ventilators represent an investment in healthier, more comfortable living spaces.