Model 1000RHC Model 1000RHCAC | Lifebreath 1200DDPOOL, 700DDPOOL

WEIGHT

99-101

99-130

SPECIFICATIONS

CORES

Modular (3 section) patented aluminum heat recovery cores arranged for high efficiency cross-flow ventilation. Meets the flame spread and smoke developed classifications of the National Building Code and NFPA 90A (1993 Edition).

MOTORS

Two PSC, 3 speed double shafted, 120 VAC, 3.95 Amps each (7.9 total on high speed). HP - 1/4, 1625 RPM. Watts - total on high speed - 848.

FILTERS Washable air filters in exhaust and supply air streams.

BLOWERS

Each air stream has one double shafted motor driving 2 centrifugal blowers.

HYDRONIC REHEAT COIL

Standard built-in coil in both 1000RHC and 1000RHCAC. Rated 35,000 BTU

@140°F, 3 US gal./min. Design temperature drop is 20°F, fluid pressure drop is 1.3 feet WG at rated flow, 3/4" fittings.

CONNECTION DUCT SIZES Five - 20" X 8" H (508 mm x 200 mm H).

DIRECT EXPANSION (DX) EVAPORATOR COIL (model 1000RHCAC only) Factory installed 1.5 ton DX coil, 0.875" OD suction side, 0.625" OD liquid side, built-in orifice.

MOUNTING

Two brackets under cabinet, connect to threaded rod type supports (not included).

CASE

20 gauge prepainted galvanized steel (G60) for superior corrosion resistance. Insulated with foil faced insulation where required to prevent exterior conden- sation. Drain connections; two - 1/2" (12 mm) O.D.

CONTROLS

Illuminated power switch, 3 speed blower control, low voltage (24 VAC) termi- nals to connect remote controls (not included), defrost light indicating defrost/recirculation mode.

DEFROST CONTROLS

Supply bypass damper routes indoor air to defrost core.

255 lbs.(116 Kg) SHIPPING WEIGHT 280 lbs.(127 Kg)

DIMENSIONS 1000RHC/RHCAC mm (inches)

Model 1000RHC and

Model 1000RHCAC

PERFORMANCE

AIRFLOWS (Each Air Stream)

L/s (CFM)	613 (1300)								VAC
	613 (1300)								(AMPS) @ 120
	566 (1200)							8.1 HIGH
	518 (1100)
	472 (1000)					HIGH SPEED		7.8 MED
						HIGH SPEED


AIRFLOW	423 (900)								CURRENT DRAW
	378 (800)							7.1 LOW
	378 (800)
	329 (700)
	282 (600)
	235 (500)
	235 (500)								TOTAL
	25 (.1)	50 (.2)	75 (.3)	100 (.4)	125 (.5)	150 (.6)	175 (.7)	200 (.8)	TOTAL
	25 (.1)	50 (.2)	75 (.3)	100 (.4)	125 (.5)	150 (.6)	175 (.7)	200 (.8)

EXTERNAL STATIC PRESSURE IN PASCALS (in. W.C.)

TEMPERATURE EFFECTIVENESS

EFFECTIVENESS	50%
	70%
	60%

NOTE: Exhaust Relative Humidity (RH) at 40%

235

282

329

378

423

472

518

566

(500) (600) (700) (800) (900) (1000) (1100) (1200)

AIRFLOW IN L/s (CFM)

Performance data includes both reheat and DX coil installed. Note there is little change in air flow with the DX coil removed.

DEFROST &

SUPPLY AIR

EXHAUST AIR

FROM OUTSIDE

RECIRCULATION

TO OUTSIDE

AIR

NOTE:

Service clearance

is 760 mm (30 in.)

EXHAUST AIR

FROM BUILDING

1088 mm

DRAIN CONNECTION

SUPPLY AIR

(46 3/4")

TO BUILDING

FRONT VIEW

CONTROLS

508 mm

(20")

263 mm

(10 3/8 ")

200 mm

(8")

	1055 mm
COIL FITTINGS	(41 1/2")

DISCHARGE SIDE

625mm (24 5/8")

	263 mm	508 mm
	(10 3/8 ")	508 mm
	(10 3/8 ")	(20 ")
		(20 ")

149 mm (5 7/8 ")

508 mm

(20 ")

INLET SIDE

Sixty Minute Remote Timer

WARRANTY

Remote Wall Mount Dehumidistat Control 24VAC only

All units conform to CSA and UL standards.

Units carry a 15 year warranty on the heat recovery cores and a 2 year replacement parts warranty.

NOTE: Hydronic reheat coil is designed to temper the ventilation air (after heat recovery) back to room temperature, and is not intended for use as a primary heating source for the space.

•Additional controls MUST be added to pump system (not included / not available from Nutech) feeding the coil to ensure continuous water flow through it, and prevent freezing of the coil.

•DX coil is designed to reduce humidity brought in from outside during ventilation. Coil MUST be connected to an outdoor condensing unit (not included) by certified trades person. Not intended as a primary air conditioning system for the space.

DATE:_____________________________________________PROJECT: ________________________________________

MECHANICAL CONTRACTOR: __________________________________________________________________________

5	TI-115
	1203

1200DDPOOL, 700DDPOOL, 1000RHCAC, 1000RHC specifications

Lifebreath is a brand renowned for its commitment to energy-efficient indoor air quality solutions. Among their offerings, the Lifebreath 700DDPOOL, 1200DDPOOL, 1000RHCAC, and 1000RHC stand out as exemplary products designed for various residential and commercial settings. These units leverage cutting-edge technologies to provide superior ventilation, heat recovery, and air quality management.

The Lifebreath 700DDPOOL is specifically designed for indoor pools and similar environments. This model boasts dual-flow ventilation, which simultaneously circulates fresh air into the space while expelling stale air. The 700DDPOOL features a built-in dehumidistat, ensuring optimal humidity levels are maintained, which is vital for preventing mold and preserving air quality. Its energy recovery capabilities make it an eco-friendly choice, reclaiming heat from exhaust air to pre-condition incoming air, thus significantly reducing heating costs.

The Lifebreath 1200DDPOOL offers similar benefits but on a larger scale. With a higher airflow capacity, the 1200DDPOOL is ideal for larger pool areas or heavily used commercial spaces. It also incorporates advanced filtration technologies that trap allergens, dust, and pollutants, resulting in cleaner air. Both the 700DDPOOL and 1200DDPOOL are engineered for easy installation and maintenance, with features like removable filters and accessible components.

The Lifebreath 1000RHCAC and 1000RHC models shift focus towards whole-home ventilation and air conditioning solutions. The 1000RHCAC combines heat recovery with air conditioning capabilities, allowing for year-round climate control. The unit’s heat exchanger efficiently recovers heat from the outgoing air and transfers it to the incoming air, ensuring that energy is conserved even during cooling seasons.

In contrast, the Lifebreath 1000RHC emphasizes effective heat recovery without an integrated air conditioning system, making it an excellent choice for areas where cooling is not a priority. Both models boast a quiet operation, ensuring no disruption to daily living, along with energy-efficient certifications that appeal to eco-conscious consumers.

Overall, Lifebreath’s 700DDPOOL, 1200DDPOOL, 1000RHCAC, and 1000RHC models provide exceptional performance, versatility, and user-friendly features. These air management systems represent the future of sustainable indoor air quality solutions, meeting diverse ventilation needs while prioritizing energy efficiency and comfort. With Lifebreath, users can breathe easier knowing they have invested in cutting-edge technology designed for health and efficiency.