Figure 5.1: Programming User Access Codes
Enter your [ACCESS CODE] (System Master Code or User Access Code with Master feature).
Press [0] to enter the Programming Menu.
From Programming Menu, press [ACC].
Enter the
Enter a User Code within the brackets. Press the [S] button to reach the User Options screen.
NOTE: The User Code is a Personal Identification Number (P.I.N.).
Program the User Options by pressing the number on your keypad corresponding to the User Option you wish to enable. The option is considered ON when the number appears within the brackets. Proceed to step 7 by pressing the [S] button. For a detailed description of the User Options refer to section 5.4 on page 11.
Options [1] and [2] : Master Feature
[1]OFF = Master Feature disabled.
[1]ON, [2] OFF = User can only modify User Access Codes.
[1]ON, [2] ON = User has full Master rights. User can create, modify, and program User options, User Access Options and Area Assignments.
Option [3]: Duress
Option [4]: Bypass
Option [5]: Arm Only
Option [6]: Stay and Instant Arm
Option [7]: Force Arm
Option [8]: OFF - Access keypad’s partitions only
Option [8]: ON - Access any partition assigned to user
LCD Keypad 9