! ! | CAUTION | ! ! |
|
|
|
While this speaker is designed to be water and spray resistant, it is not designed to be submerged or to withstand
#10 SCREW: PILOT HOLE RECOMMENDATIONS
Fiberglass Thickness | Recommended Pilot Hole Drill Size |
|
|
0.125 in. (3.18 mm) or less | 1/8 in. (3.18 mm) pilot hole |
|
|
foam core / fiberglass sandwich | 1/8 in. (3.18 mm) pilot hole |
|
|
larger than 0.125 in. (3.18 mm) | 9/64 in. (3.57 mm) pilot hole |
|
|
submersibles, personal watercraft or any other vessel likely to be under water at any time.
Prolonged exposure to sound pressure levels in excess of 100dB can cause permanent hearing loss. This
When installing a subwoofer in your vessel, it is extremely important to secure it firmly. This applies not only to the woofer itself, but also the structure it is mounted to. If not firmly attached, the speaker can become a dangerous projectile in a collision. Please review the mounting information carefully and use the supplied
INTERCHANGEABLE LOGO BADGE (Sport-Grille Models Only)
Interchangeable Logo Badges for Sport Grille model subwoofers are included to further customize your installation. The design of the Sport Grille allows for the JL Audio logo to be added in your choice of included colors and oriented in the manner that best suits your installation.
NOTE: A left and a right badge of each color is included. These two different orientations ensure the “JL Audio” Logo will read correctly wherever positioned (most commonly the 3:00 or 9:00 position).
Remove the adhesive backing from the badge and affix the badge to the grille using the small positioning hole as a guide. See diagram at right.
3:00 Position |
9:00 Position |
ENCLOSURE SPECIFICATIONS
Subwoofer |
| Recommended Sealed Design |
|
| ||
|
|
|
|
|
| |
| Volume | External Dimensions | F3 | Fc | Qtc | |
| (net int.) | (Width x Height x Depth) | (Hz) | (Hz) | ||
|
| |||||
|
|
|
|
|
| |
M10W5 | 0.875 ft³ | 14 in. x 14 in. x 12 in. | 49 | 52.85 | .770 | |
24.8 litres | 356 mm x 356 mm x 305 mm | |||||
|
|
|
| |||
M10IB5 | 2.50 ft³ | 18 in. x 18 in. x 17.75 in. | 42 | 51.06 | .918 | |
70.8 litres | 457 mm x 457 mm x 451 mm | |||||
|
|
|
|
Sealed Design
Ported Design
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| NOTE: The M10IB5 Marine Subwoofer is not | ||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| recommended for use in Ported Enclosures. | ||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Subwoofer |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Recommended Ported Design |
|
|
| ||||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||
|
|
|
|
|
| Volume |
| Enclosure External Dimensions |
| Round Port Specs |
|
|
|
| Port Information | Tune to: | F3 | ||||||||||||||||||||||
|
|
|
|
|
| (net int.) |
|
|
|
| (Width x Height x Depth) | (Inner Diameter x Length) |
|
|
|
| (Hz) | (Hz) | |||||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||||||||||||||||||||
M10W5 | 1.250 ft³ |
|
|
|
| 16.5 in. x 13.5 in. x 14 in. |
|
| 3 in. x 13 in. | Round port requires a 90˚ elbow | 32 | 34 |
| ||||||||||||||||||||||||||
35.4 litres |
|
|
| 419 mm x 343 mm x 356 mm |
| 76 mm x 330 mm |
| to fit in the specified enclosure |
| ||||||||||||||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The enclosure recommendations listed are external dimensions which assume the use of 3/4” (19mm) thick material. If you are using 5/8” (16mm) thick material, subtract 1/4” (6.5mm) from each dimension. Do not use any material with a thickness of less than 5/8” (16mm) as this may compromise the rigidity of the enclosure.
All enclosure volumes listed are net internal volumes! Box volume displacement, port displacement and brace displacement must be added to obtain the final gross internal volume. All enclosure dimensions listed have already taken this into account.
JL AUDIO M10IB5/M10W5 | A l l s p e c i f i c a t i o n s a r e s u b j e c t t o c h a n g e w i t h o u t n o t i c e . | 3 |