Intel EE110EM manual Avertissement

Page 19

Federal Communications Commission (FCC) Statement

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

The user is cautioned that changes and modifications made to the equipment without approval of the manufacturer could void the user’s authority to operate this equipment.

Manufacturer Declaration

This certifies that the Intel Ethernet Module or the Intel Fiber Module complies with the EU Directive 89/33/EEC, using the EMC standards EN55022 (Class A) and EN50082-1. This product also meets or exceeds EN 60950 (TUV) requirements. This product has been tested and verified to meet CISPR 22 Class A requirements.

WARNING

This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures.

WARNING

The system is designed to operate in a typical office environment. Choose a site that is:

·Clean and free of airborne particles (other than normal room dust).

·Well ventilated and away from sources of heat including direct sunlight.

·Away from sources of vibration or physical shock.

·Isolated from strong electromagnetic fields produced by electrical devices.

·In regions that are susceptible to electrical storms, we recommend you plug your system into a surge suppressor and disconnect telecommunication lines to your modem during an electrical storm.

·Provided with a properly grounded wall outlet.

Do not attempt to modify or use the supplied AC power cord if it is not the exact type required.

Ensure that the system is disconnected from its power source and from all telecommunications links, networks, or modems lines whenever the chassis cover is to be removed. Do not operate the system with the cover removed.

AVERTISSEMENT

Le système a été conçu pour fonctionner dans un cadre de travail normal. L’emplacement choisi doit être:

·Propre et dépourvu de poussière en suspension (sauf la poussière normale).

·Bien aéré et loin des sources de chaleur, y compris du soleil direct.

·A l’abri des chocs et des sources de ibrations.

·Isolé de forts champs magnétiques géenérés par des appareils électriques.

·Dans les régions sujettes aux orages magnétiques il est recomandé de brancher votre système à un supresseur de surtension, et de débrancher toutes les lignes de télécommunications de votre modem durant un orage.

·Muni d’une prise murale correctement mise à la terre.

Ne pas utiliser ni modifier le câble d’alimentation C. A. fourni, s’il ne correspond pas exactement au type requis.

Assurez vous que le système soit débranché de son alimentation ainsi que de toutes les liaisons de télécomunication, des réseaux, et des lignes de modem avant d’enlever le capot. Ne pas utiliser le système quand le capot est enlevé.

18

Page 18 Page 20
Image 19
Page 18 Page 20
Contents User Guide This guide covers the following products Plug a device in and check the LEDs for a link. You’re done Quick StartContents Bridging 10 and 100 Mbps hubs Ethernet ModuleBridging hubs running at 10 Mbps to hubs at 100 Mbps Example configurationsUse Intel Cascade Cable to stack hubs Connecting 100 Mbps hubs with TPE cableConnecting to a switch at full-duplex Connecting to a device at full-duplexConnecting to a switch at full-duplex Connecting to a server at full-duplex Port LEDs Understanding Ethernet Module LEDsStatus Meaning Change duplex button and LEDs To change the duplex modeTo change the speed Change speed button and LEDsColl collision LED Fiber Module Connecting hubs beyond 100 metersConnecting to another Fiber Module at full-duplex Half duplex Full duplex Duplex LEDs Understanding Fiber Module LEDsFiber Module Technical SpecificationsTransmit/Receive/Link/Collision LEDs Ethernet ModuleLimited Hardware Warranty Avertissement Warnung Intel BBS World Wide Web & Internet FTP

EE110EM specifications

The Intel EE110EM is an advanced embedded processor designed to meet the demanding requirements of industrial and commercial applications. With a focus on performance, efficiency, and integration, the EE110EM delivers robust capabilities for managing complex tasks across various environments.

One of the standout features of the Intel EE110EM is its powerful multi-core architecture. The processor is equipped with multiple cores that allow for simultaneous processing of multiple threads, significantly enhancing the overall system efficiency. This multi-threading capability is particularly beneficial for applications that require real-time processing, such as industrial automation, robotics, and telecommunications.

Another key characteristic of the EE110EM is its energy efficiency. The Intel architecture is designed to operate at lower power levels without compromising performance. This energy-efficient design is critical for embedded systems that often rely on battery power or have thermal constraints. By optimizing power consumption, the EE110EM helps to prolong device lifespans and reduce operational costs.

The EE110EM also integrates a myriad of advanced technologies to enhance functionality. One notable feature is Intel’s virtualization technology, which allows multiple operating systems to run on a single hardware platform, ensuring flexibility and scalability in various applications. Additionally, the processor supports various connectivity options, including Ethernet and serial interfaces, enabling seamless communication with other devices and systems.

Moreover, the Intel EE110EM incorporates enhanced security features to protect sensitive data and ensure system integrity. With built-in security mechanisms, such as secure boot and hardware-based encryption, the processor helps safeguard embedded systems against potential vulnerabilities, making it an ideal choice for applications in sectors like finance, healthcare, and critical infrastructure.

In terms of memory support, the EE110EM accommodates high-bandwidth memory options, allowing for quick data access and processing speeds. This capability is essential for applications that require large data handling and real-time analytics, such as video surveillance and consumer electronics.

Overall, the Intel EE110EM stands out as a versatile and powerful embedded processor suitable for a wide range of applications. With its multi-core architecture, energy-efficient design, advanced technologies, and robust security features, it provides a compelling solution for developers looking to build reliable and innovative embedded systems. As industries continue to evolve towards more connected and intelligent solutions, the EE110EM is well-positioned to meet these future challenges.
Top Page Image Contents