4Programming 1999.9.15 12:43 PM 페이지46

NX-SERIESHYBRID KEY SYSTEM

PROGRAMMING SECTION

 

 

MMC 45

TRUNK GROUP

This MMC is used to set the free trunk selection type to a specific trunk, trunk group, or to several trunk groups.

There are eleven (11) trunk groups: 9 and 80 through 89, and three types of selecting a free trunk line in the group.

MODE DESCRIPTION

DISTRIBUTE Searches the trunk group in circular order. Each time the group is accessed, the next available trunk in the group is selected.

High to Low Searches the trunk group last to first trunk in the group. If a trunk is busy, the previous available trunk in the group is selected.

Low to High Searches the trunk group. If the first trunk in the group is busy, the next iavailable trunk in the group is selected.

PROCEDURE

LCD DISPLAY

1. Press [TRANSFER] and dial 45

Display shows the first free trunk selection type

2. Using [MUTE] or [MESSAGE], select the free trunk selection mode

OR

Using KEYPAD, dial

1 for DISTRIBUTE

2 for High to Low or 3 for Low to High.

3. Using [VOLUME (-)or (+)], select the trunk group

4. Press [REDIAL] or [FLASH] to scroll through the group

If dialed number is the member of another trunk group, the trunk number will removed from the previous group automatically. Dialed number overwrites the previous number.

5. Enter a valid trunk number

6. Press [TRANSFER] to save and exit

DEFAULT DATA

GROUP 9

: All trunk lines

GROUP 80~89

: NONE

RELATED MMC

NONE

Page 115
Image 115
Samsung NX-308 technical manual Trunk Group, Mode Description