
3feature 1999.9.15 12:44 PM 페이지9
FEATURES SECTION |
CHAIN DIALING
Station users may manually dial additional digits following a
CLASS OF SERVICE
System programming may assign any of six outgoing call restriction levels. Refer to the TOLL RESTRICTION feature.
➥MMC 30 STATION TOLL CLASS
CONFERENCE
Any combination of up to 5 parties (stations or outside lines) can be joined together in conference. A station user may also set up the conference with two or more outside lines and then exit the conference leaving the outside lines connected in an unsupervised (trunk to trunk) conference. Conferees may be eliminated or added after a conference has been established.
DATA SECURITY
➥MMC 39 DATA LINE
DIRECT IN LINES
Outside lines may be programmed to bypass the operator(s) and ring directly at any station, group of stations, or paging system.
➥MMC 43 ASSIGN TRUNK RING
DIRECT INWARD SYSTEM ACCESS (DISA)
Users can call in on specified DISA lines at any time and receive the system dial tone or
➥MMC 46 ASSIGN DISA LINE
MMC 01 CHANGE STATION PASSCODE
DISA VOICE ANNOUNCEMENT
DISA lines may use
➥MMC 42 TRUNK ON/OFF⇒ VOICE MSG (VOICE RECORDING ⇒ 18)
➥APPENDIX C
3 - 5