3feature 1999.9.15 12:44 PM 페이지16
NX-SERIESHYBRID KEY SYSTEM | FEATURES SECTION |
database from a remote location via a customer-provided modem to make programming changes and view traffic reports as a troubleshooting aid. A customer PC can also be connected directly to the Base board for on-site programming.
➥MMC 80 IO PARAMETER
RING OVER PAGE
A system-generated ring tone can be programmed on a per-line basis to signal over the external paging system when the system is in Night mode.
➥MMC 42 TRUNK ON/OFF ⇒ RING OVER PAGE: OFF
SINGLE-LINE CONNECTIONS
Single-line ports allow for the connection of a variety of single-line telephones, facsimile and answering machines, external bells, modems, cordless phones, and credit card machines. When connecting customer-provided equipment at these stations, compatibility should be verified before purchase to ensure correct operation. Connecting single-line telephones (SLT) to the system may require some programming, depending on the SLT type.
➥MMC 38 SLT DIALING TYPE (DTMF, PULSE)
SLT Related Timers
HOOK OFF
SLT F MIN
SLT F MAX
➥MMC 50 SYSTEM TIMERS
Data Security
➥MMC 39 DATA LINE
SPEED-DIAL NUMBERS
STATION SPEED-DIAL
Each station has the capability of storing up to twenty Speed-Dial numbers: 00 to 19, each of which may contain a maximum 30 digits.
➥MMC 17 STATION SPEED-DIAL
SYSTEM SPEED-DIAL
The system can store up to 80 Speed-Dial numbers: 20 to 99, each of which may contain a maximum 30 digits. These system Speed-Dial numbers may be used by any station.
➥MMC 67 ASSIGN SYSTEM SPEED-DIAL
3 - 12
