
4Programming 1999.9.15 12:43 PM 페이지48
MMC 50SYSTEM TIMERS
This MMC is used to adjust individual timers as necessary. All available timers are described in the TABLE OF TIMERS AND VALUES.
NOTE: Seconds are shown as 'SEC', milliseconds as 'MS', and minutes as 'MIN'.
PROCEDURE | LCD DISPLAY |
1. Press [TRANSFER] and dial 50
2. Press [VOLUME
3. Enter new value using KEYPAD
4. Press [TRANSFER] to save and exit
DEFAULT DATA
See TABLE OF TIMERS AND VALUES
RELATED MMC
NONE
TABLE OF TIMERS AND VALUES
DISPLAY | DESCRIPTION | DEFAULT | RANGE |
ALM R INT | controls the time length between ring attempts | 025SEC | 250SEC |
(Alarm ring | at a station when alarm reminder is set. |
|
|
interval) |
|
|
|
ALM R DUR | controls the length of ring cycle duration when | 010SEC | 1~250SEC |
(Alarm ring | alarm reminder is set at a station. |
|
|
duration) |
|
|
|
ARDL INT | controls the time between attempts after Auto | 045SEC | 1~250SEC |
(Auto Redial | Redial is set 'ON' at a station. |
|
|
interval) |
|
|
|
ARDL RELS | controls the duration of a Ring No Answer | 045SEC | 1~250SEC |
(Auto Redial | condition on an |
|
|
release time) | before auto redial is canceled. |
|
|
CBACK NOA | controls the time before the callback is canceled | 030SEC | 1~250SEC |
(Callback no | when a callback detects Ring No Answer |
|
|
answer time) |
|
|
|
CO CO DIS | monitors the duration of an unsupervised | 010MIN | 1~250MIN |
(CO to CO | conference, external call forward, or DISA call. |
|
|
disconnect | upon expiring, both trunks are disconnected. |
|
|
time) |
|
|
|
DISA F DG | controls how long the system will wait for | 025SEC | 1~250SEC |
| dialing to begin the DISA incoming call. |
|
|
DISA I DG | controls the grace period between dialing valid | 025SEC | 1~250SEC |
| digits before dropping the call to DISA user. |
|
|
DISA RING | controls no answer time for DISA internal calling. | 030SEC | 1~250SEC |
DOOR RELS | controls the duration of time before the door | 1500MS | 100~ |
(Door release | lock relay deactivates. |
| 2500MS |
time) |
|
|
|