Samsung NX-308 technical manual Ext/Trk Use, Dial Digit TRK USE Description

4Programming 1999.9.15 12:43 PM 페이지31

NX-SERIESHYBRID KEY SYSTEM	PROGRAMMING SECTION
MMC 31	EXT/TRK USE

This MMC is used to allow trunks the ability to answer incoming calls, to dial out, or to do both, on a per-station basis. Those abilities are displayed as Y or N for each action

(e.g. NY: disallow dialing out and allow answering incoming calls).

DIAL DIGIT	TRK USE	DESCRIPTION
00	NN	You cannot either dial and answer
01	NY	You cannot dial but can answer
10	YN	You can dial but cannot answer
11	YY	You can both dial and answer

PROCEDURE		LCD DISPLAY
1.	Press [TRANSFER] and dial 31
2.	Using [VOLUME (-)or (+)], Select a station (e.g. 202)
	To select all stations, press [VOLUME (-)]first
3. Select trunk number by pressing [REDIAL] or [FLASH]
	repeatedly
	To select all trunks, press [REDIAL] first
4.	You can select NN, NY, YN or YY stations (e.g., NY)
	Using KEYPAD,
	0 for deny the action
	1 for allow the action
	(Two digits must be dialed. First digit for	dialing out,
	and second for answering incoming calls.)
5.	Press [TRANSFER] to save and exit

DEFAULT DATA

ALL TRUNK : YY

RELATED MMC

NONE