Samsung NX-308 Assign Station Group, Options Display Range, Ring Modes Description, Group Types

4Programming 1999.9.15 12:43 PM 페이지35

NX-SERIESHYBRID KEY SYSTEM	PROGRAMMING SECTION
MMC 35	ASSIGN STATION GROUP

This MMC is used to assign members of a station group. There are several options that can be selected for ringing, overflow, group transfer and overflow destination, and group type. There may be a maximum twenty (20) groups.

OPTIONS	DISPLAY	RANGE
Ring mode	RING
Overflow time	OVER	000	∼ 250 sec
Group transfer time	TRSF	000	∼ 250 sec
Overflow port	NEXT
Group types	TYPE

RING MODES	DESCRIPTION
1 SEQUENTIAL	The first idle station listed in the group will ring. If the first is busy,
	the next idle station will ring.
2 DISTRIBUTE	The first call will ring the first station listed in the group.
	The next call will ring the next station listed in the group.
3 CONDITION	All the stations but non-busy stations listed in the group will ring.
4 UNCONDITION	All the stations listed in the group will ring. Busy stations will
	receive off-hook ring.

GROUP TYPES

1NORMAL GROUP

2VMAA GROUP

PROCEDURE LCD DISPLAY

1. Press [TRANSFER] and dial 35

Display shows ring mode of Operator group 500.

2. Using [VOLUME (-)or (+)], select a station group number (500∼519).

3. Press [REDIAL] or [FLASH] to select options (RING, OVER, TRSF, NEXT, TYPE, MEMBER)

4a. Press [MUTE] or [MESSAGE] to select ring mode

OR

Dial

1 for SEQUENTIAL

2 for DISTRIBUTE

3 for CONDITION

or 4 for UNCONDITION

4b. To change the OVERFLOW TIME, enter 3 digits of

OVERFLOW TIME

4c. To change the GROUP TRANSFER TIME, dial 3 digits of GROUP TRANSFER TIME