Excellence in MotionTM
17 TM
MICROSTEPPING
FEATURES
•Highly Integrated Microstepping Driver and NEMA 17 High Torque 1.8° Brushless Step Motor
•Advanced 2nd Generation Current Control for Exceptional Performance and Smoothness
•Single Supply: +12 to +48 VDC
•Cost Effective
•Extremely Compact
•20 Microstep Resolutions up to
51,200 Steps Per Rev Including: Degrees, Metric, Arc Minutes
•Optically Isolated Input Options:
-Universal +5 to +24 VDC Signals, Sourcing or Sinking
-Differential +5 VDC Signals
•Automatic Current Reduction
•Configurable:
-Motor Run/Hold Current
-Motor Direction vs. Direction Input
-Microstep Resolution
-Clock Type: Step and Direction, Quadrature, Step Up and Step Down, Clockwise and Counterclockwise
-Programmable Digital Filtering for Clock and Direction Inputs
•Available Options:
-Long Life Linear Actuators**
-Encoder: External Optical or Internal Magnetic
-Integrated Planetary Gearbox
-Control Knob for Manual Positioning
-Linear Slide
-IP65 Sealed Configuration with M23 Circular Connector
•3 Rotary Motor Lengths Available
•Setup Parameters May Be Switched
•Interface Options:
-Pluggable Locking Wire Crimp1
-Pluggable Terminal Strip
-12.0” (30.5cm) Flying Leads
•Graphical User Interface (GUI) for Quick and Easy Parameter Setup
**Consult Factory for Availability.
1Not available with Differential Input option.
DESCRIPTION
The MDrive17Plus Microstepping high torque integrated motor and step and direction driver is ideal for designers who want the simplicity of a motor with on- board electronics. The integrated electron- ics of the MDrive17Plus eliminate the need to run motor cabling through the machine, reducing the potential for problems due to electrical noise.
The unsurpassed smoothness and per- formance delivered by the MDrive17Plus Microstepping are achieved through IMS's advanced 2nd generation current con- trol. By applying innovative techniques to control current flow through the motor, resonance is significantly dampened over the entire speed range and audible noise is reduced.
The MDrive17Plus accepts a broad input voltage range from +12 to +48 VDC, deliv- ering enhanced performance and speed. Oversized input capacitors are used to minimize power line surges, reducing problems that can occur with long runs and multiple drive systems. An extended operating range of
The MDrive17Plus uses a NEMA 17 frame size high torque brushless step motor integrated with a microstepping driver, and accepts up to 20 resolution settings from full to 256 microsteps per full step, including: degrees, metric and arc minutes. These settings may be changed
For use in environments where exposure to chemical, dust and liquids may occur, a sealed
unit with
The versatile MDrive17Plus Microstep- ping is available in multiple configurations to fit various system needs. Rotary motor versions come in three lengths and may in- clude an encoder, control knob, planetary gearbox or linear slide. Long life Acme screw linear actuators** are also available.
Numerous connector styles give you choices for the best fit and features. Select from 12.0” (30.5cm) flying leads, pluggable terminal strip, locking wire crimp connec- tors1, and M23 circular connectors on IP65 sealed versions1.
MDrivePlus connectivity has never been easier with options ranging from
The MDrive17Plus is a compact, powerful and cost effective motion control solution that will reduce system cost, design and assembly time for a large range
of brushless step motor applications.
CONFIGURING
The IMS Motor Interface software is an easy to install and use GUI for configuring the MDrive17Plus from a computer's USB port. GUI access is via the IMS SPI Motor Interface available at www.imshome.com.
The IMS SPI Motor Interface features:
•Easy installation.
•Automatic detection of MDrive version and communication configuration.
•Will not set
•
•Simple screen interfaces.
www.imshome.com