Installation Checklist, IV Operation | GSW JWF507, JWF657 instruction

Installation Checklist

Check Here

1. Have the safety precautions described in the manual been implemented?

2. Does the oil piping conform to the recommen- dations of your Oil Supply Company?

3. Has the oil piping been tested for leaks?

4. Is the clearance between the water heater and combustible construction as per specifica- tions?

5. Is the water piping correctly connected? Are you certain that there are no leaks?

6. Is the water heater filled with water?

7. Is the cold water supply valve open?

8. Is the flue pipe installed properly and are the vertical and horizontal runs properly support- ed?

9. Is the draft regulator intake opening unob- structed?

10. Is the T&P valve installed? Are the drain pipe (if installed) and T&P valve unobstructed?

11. Is a drain pan installed (if required) with a proper overflow pipe, directed to a drain?

12. Have you taken steps to prevent water dam- age in case of leaks?

13. Does the area around the water heater have adequate ventilation?

14. Air moving device does not create negative pressure?

15. Flammable vapours and materials are not placed in the proximity of the water heater?

If the answer to all the above is “Yes”, proceed with the “Startup” instructions.

IV) OPERATION

Startup

CAUTION:

Read before proceeding. If you do not follow these instructions exactly, a fire or explosion may result, causing property damage, per- sonal injury or loss of life.

DO NOT ATTEMPT TO START BURNER IF ANY OF THE FOLLOWING CONDITIONS EXIST:

1.Excess oil has accumulated.

2.The unit is full of vapours.

NOTE: Refer to the instruction manual supplied with the burner for installation, start up and adjustment.

After the installation is finished and the installation checklist completed, proceed as follows:

1.Set the draft regulator for full draft.

2.Turn on oil at the tank. Adjust the air band on the burn- er according to the instructions provided by the burner manufacturer.

3.Close the inspection cover on the burner mounting panel, and press the reset button on the combustion safety control.

4.Set electric switch to “ON” position. The burner should start.

5.Make the air adjustment and take the necessary com- bustion test readings as specified by the burner manu- facturer.

Water Temperature Regulation

Once installed, the operation will be completely automatic. The thermostat (aquastat) on the water heater is adjustable and will maintain water at the desired temperature. Thermostats are factory set at 49°C (120°F). Contact a qual- ified Oil-Burner Technician for adjustment. Set the tank ther- mostat as low as possible to provide an adequate supply of hot water. This will conserve oil and extend the life of the tank.

WARNING:

Risk of scalding

Hot water can produce third degree burns

in 6 seconds at	60°C (140°F)
in 30 seconds at	54°C (130°F)
in 5 minutes at	49°C (120°F)

– 16 –

JWF657, JWF507 specifications

The GSW JWF657 and JWF507 are two prominent models in the GSW lineup, known for their innovative features, advanced technologies, and robust characteristics. These models have been designed to cater to a wide range of applications, making them popular choices among users looking for efficient performance and reliability.

Starting with the JWF657, this model boasts a high-capacity design, making it suitable for both residential and commercial use. One of its standout features is the energy-efficient motor that not only reduces power consumption but also enhances performance. The JWF657 includes a user-friendly control panel that allows for easy adjustments and settings, ensuring that users can operate the machine with minimal effort.

In terms of technology, the JWF657 integrates smart sensors that monitor operational parameters in real-time. This feature ensures that the equipment runs at optimal efficiency, reducing wear and tear while extending the lifespan of the product. Another noteworthy attribute is the noise reduction technology, which minimizes operational sound, making it ideal for environments where noise levels need to be kept to a minimum.

On the other hand, the JWF507 model is tailored for those who prioritize compactness without compromising performance. Its sleek design makes it a perfect fit for smaller spaces, while its powerful engine ensures that it can handle demanding tasks with ease. The JWF507 also includes advanced safety features such as automatic shut-off systems and overload protection, ensuring user safety and preventing equipment damage.

Both models are equipped with advanced filtering technologies that promote better air quality and energy conservation. They come with durable construction materials that can withstand harsh conditions, ensuring longevity and reliability. Additionally, routine maintenance is simplified with easy access points for cleaning and servicing.

In summary, the GSW JWF657 and JWF507 are engineered for excellence, combining innovative features with user-friendly designs to offer optimal performance. Whether you need high capacity or compact efficiency, these models stand out in the market for their reliability, safety features, and advanced technologies. Users can trust these products to deliver consistent results while being easy to maintain and operate.