SPECIFICATIONS
Model | Power/Electrical | Cooling Capacity | Input | EER |
| Requirements |
|
|
|
110/115 volt, 60Hz | 4000 BTU/h (1170W) | 410W | 9.76 | |
220/240 volt, 50Hz | 3500 BTU/h (1030W) | 310W | N/A |
BEFORE USING
IMPORTANT: Remove unit from packaging and discard clear, plastic wrapping. Place unit in its upright position for a minimum of two hours before operating for the first time.
1.Place unit on a solid, level surface. Operating this unit on uneven or soft surfaces may cause vibration, noise, and possible water leakage from the condensate tank.
2.Place unit at least 20" from any walls, draperies, or other obstructions. Carefully push the unit on its caster wheels to desired location.
CAUTION: Do not operate unit without condensate water tank and air filters properly in place.
3.Check that condensate water tank is properly installed. When properly installed, the door of the condensate water tank will be flush with the exterior of the unit.
4.Check that both air filters are clean and properly installed.
8