Operation, Maintenance and Service, Power On

OPERATION

Power On

Plug your subwoofer’s AC cord into a wall outlet. Do not use the outlets on the back of the receiver.

Initially set the Subwoofer-Level Control ¡ to the “min” position. Turn on your sub by pressing the Power Switch ¶ on the rear panel.

Turn on your entire audio system and start a CD or movie soundtrack at a moderate level.

Auto On/Stand-By

With the Power Switch ¶ in the ON position, the Status LED • on the back panel will remain lit in red or green to indicate the On/Standby mode of the subwoofer.

RED = STANDBY (No signal detected, Amp Off)

GREEN = ON (Signal detected, Amp On)

The subwoofer will automatically enter the Standby mode after approxi- mately 10 minutes when no signal is detected from your system. The sub- woofer will then power ON instantly when a signal is detected. During periods of normal use, the Power Switch ¶ can be left on. You may turn off the Power Switch ¶ for extended periods of nonoperation, e.g., when you are away on vacation.

Adjust Gain

Turn your Subwoofer-Level Control ¡ up to the halfway position. If no sound emanates from the subwoofer, check the AC-line cord and input cables. Are the connectors on the cables making proper contact? Is the AC plug connected to a “live” receptacle? Has the Power Switch ¶ been pressed to the “On” position? Once you have confirmed that the subwoofer is active, proceed by playing a CD, record or cassette.

Use a selection that has ample bass information.

Set the overall volume control of the preamplifier or stereo to a comfort- able level. Adjust the Subwoofer-Level Control ¡ until you obtain a pleas- ing blend of bass. Bass response should not overpower the room but rather be adjusted so there is a harmonious blend across the entire musi- cal range. Many users have a tendency to set the subwoofer volume too loud, adhering to the belief that a subwoofer is there to produce lots of bass. This is not entirely true. A subwoofer is there to enhance bass, extending the response of the entire system so the bass can be felt as well as heard. However, overall balance must be maintained or the music will not sound natural. An experienced listener will set the volume of

the subwoofer so its impact on bass response is always there but never obtrusive.

Phase Control

The Phase Switch £ determines whether the subwoofer speaker’s piston- like action moves in and out with the main speakers, 0˚, or opposite the main speakers, 180˚. Proper phase adjustment depends on several variables such as room size, subwoofer placement and listener position. Adjust the phase switch to maximize bass output at the listening position.

Crossover Adjustment

The Crossover Adjustment Control ¢ determines the highest frequency at which the subwoofer reproduces sounds. If your main speakers can comfort- ably reproduce some low-frequency sounds, set this control to a lower frequency setting, between 50Hz and 100Hz. This will concentrate the subwoofer’s efforts on the ultradeep bass sounds required by today’s films and music. If you are using smaller bookshelf speakers that do not extend to the lower bass frequencies, set the Crossover Adjustment control to a higher setting, between 120Hz and 150Hz.

NOTE: This control will have no effect if the LFE/Normal Selector ™ is set to LFE. If you have a Dolby Digital or DTS processor/receiver, the Low-Pass Frequency is set by the processor/receiver. Consult your owner’s manual to learn how to view or change this setting.

MAINTENANCE AND SERVICE

The enclosure may be cleaned using a soft cloth to remove fingerprints or to wipe off dust.

The grille may be gently vacuumed. Stains may be removed with an aerosol cleaner, following its instructions. Do not use any solvents on the grille.

All wiring connections should be inspected and cleaned or remade peri- odically. The frequency of maintenance depends on the metals involved in the connections, atmospheric conditions, and other factors, but once per year is the minimum.

If a problem occurs, make sure that all connections are properly made and clean. If a problem exists in one loudspeaker, reverse the connection wires to the left and right system. If the problem remains in the same speaker, then the fault is with the loudspeaker. If the problem appears in the opposite speaker, the cause is in another component or cable. In the event that your subwoofer ever needs service, contact your local Infinity dealer or Infinity directly at 1.516.674.4INF or www.infinitysystems.com for a service center near you.

6PS-10/PS-12

PS-10, PS-12 specifications

The Infiniti PS-12 and PS-10 are revolutionary vehicles in the luxury automobile segment, showcasing a blend of advanced technologies, stunning design, and superior performance. Both models are designed to cater to discerning drivers who demand elegance without compromising on efficiency and innovation.

The Infiniti PS-12 is characterized by its extended performance capabilities. It features a robust hybrid powertrain that combines a powerful internal combustion engine with a high-efficiency electric motor. This dual power source provides rapid acceleration and impressive torque, resulting in a smooth yet exhilarating driving experience. With an emphasis on fuel efficiency, the PS-12 boasts impressive mileage figures, making it an economical choice for luxury vehicle aficionados.

On the other hand, the Infiniti PS-10 focuses on nimble performance and agility. It is equipped with a smaller yet potent turbocharged engine that delivers responsive power and sharp handling. The vehicle’s lightweight construction enhances its responsiveness, allowing for a dynamic driving experience that is perfect for urban environments. Both models are equipped with all-wheel drive systems that provide enhanced traction and stability, making them ideal for various driving conditions.

Technologically, the Infiniti PS-12 and PS-10 feature cutting-edge infotainment systems with large touchscreens and intuitive interfaces. These systems integrate seamlessly with smartphones, allowing drivers to access navigation, music, and communication apps with ease. The vehicles come equipped with premium audio systems that elevate the in-car experience, ensuring that every journey is infused with high-quality sound.

Safety is paramount in both models, featuring advanced driver-assistance systems. These include adaptive cruise control, lane-keeping assistance, and automatic emergency braking, which work together to provide peace of mind for drivers and passengers alike. Additionally, the vehicles are constructed with high-strength materials, enhancing occupant protection during collisions.

Interior design in the PS-12 and PS-10 exudes luxury, with high-quality materials and meticulous craftsmanship visible throughout the cabin. Comfortable seating, ample legroom, and customizable ambient lighting make every ride a pleasurable experience, whether commuting or embarking on an adventure.

In summary, the Infiniti PS-12 and PS-10 represent a perfect fusion of luxury, performance, and technology. With their unique features and innovations, these vehicles stand out in the premium automotive market, carving a niche for those who appreciate refined travel without sacrificing modern conveniences.