6.Insert the AIR FILTER by placing the bottom of the AIR FILTER inside your AirTamer and pushing it past the large front rubber tab. Then push the top of the AIR FILTER past the large front rubber tab at the top of the unit.
NOTE:
Make sure that the AIR FLOW ARROWS on the filter face towards the front of the unit.
7.Replace the AIR EXIT GRILL.
8.Place the unit on a level floor, keeping it at least 4” (10.2 cm) away from any wall, furniture or appliances. Position the unit so that the clean air will flow to your desired area (clean air flows from the front of the unit). Ensure that the AIR INTAKE GRILL and AIR EXIT GRILL are not blocked.
6
7
Power On/Off
1.The POWER CORD is shipped as two pieces.
Connect the two pieces, plug the end with wall outlet prongs into an electrical outlet, and the round end into the POWER JACK located at the back of your AirTamer®.
2.Press the POWER BUTTON to turn the unit on. The POWER BUTTON will illuminate when on.
Fan Speed
Your unit will initially start at the highest speed – Speed 5. Select your desired fan speed by pressing the corresponding SPEED BUTTON. Your AirTamer® has five (5) SPEED SETTINGS 1, 2, 3, 4, and 5.
SPEED 5
will provide the highest rate of cleaning performance, but more noise.
SPEED 1
will provide the least amount of noise, but a slower rate of cleaning. Normally, the lower speeds are ideal for sleep or relaxation environments.
Page 8 | AirTamer® |