Troubleshooting Guide
Issue | Resolution | |
|
| |
CHANGE | This may mean that it is time to replace the AIR FILTER | |
FILTER LIGHT | installed in your unit. This is dependant upon which | |
is orange. | model of air filter you are using. | |
| Once you replace the AIR FILTER in your unit, press and | |
| hold the CHANGE FILTER LIGHT BUTTON for three (3) | |
| seconds. The lights on the unit will then flash once, and | |
| the CHANGE FILTER LIGHT BUTTON will change back | |
| to green and begin counting down another six (6) | |
| month period of time. | |
|
| |
CHANGE | This means that you have run the unit for two (2) weeks | |
FILTER LIGHT | after the CHANGE FILTER LIGHT has changed to | |
is pulsing | orange and you must replace the AIR FILTER soon (or | |
orange. | reset the CHANGE FILTER LIGHT if you are using a 12 | |
| month filter). | |
| Once you replace the AIR FILTER in your unit, press and | |
| hold the CHANGE FILTER LIGHT BUTTON for three (3) | |
| seconds. The lights on the unit will then flash once, and | |
| the CHANGE FILTER LIGHT BUTTON will change back | |
| to green and begin counting down the life on your new | |
| AIR FILTER. | |
|
| |
The LED | To turn the lights on the AirTamer® DOWN or OFF, | |
lights on the | press and hold the POWER button while the unit is | |
AirTamer® are | on. The unit will then cycle through its 16 brightness | |
too bright. | levels. When you have reached your desired level | |
I want the | of brightness, release the POWER button. The unit | |
will stay at that brightness level until you readjust it | ||
lights on the | ||
following the same steps. | ||
unit to be off. | ||
Note: | ||
| ||
| After pressing any button on the unit, the brightness | |
| level will go to High and then return to your chosen | |
| brightness level after four (4) seconds. | |
|
|
Page 18 | AirTamer® |