FilterStream A600 Auto Off/Delay On Timer, Using the Auto Off Timer, Using the Delay On Timer

Auto Off/Delay On Timer

You can run your AirTamer® continuously, or set it to TURN OFF auto- matically in 2, 4, 6, 8 or 12 hours. You can also set your AirTamer® to TURN ON automatically in 2, 4, 6, 8 or 12 hours. Please see the following directions.

Using the Auto Off Timer

The AUTO OFF feature automatically shuts your unit off after 2, 4, 6, 8, or 12 hours. To use the AUTO OFF feature, follow these steps:

1.Press the POWER BUTTON to turn the unit on if not on already.

2.Press the AUTO OFF BUTTON. The AUTO OFF BUTTON and 2 TIMER BUTTON will illuminate.

3.Press the TIMER BUTTON for your selected delay on time: 2, 4, 6, 8 or 12 hours later.

4.Select your speed level.

Note:

You can turn the AUTO OFF TIMER on if your AirTamer® is off by pressing the AUTO OFF BUTTON. In the continuous operation mode, no AUTO OFF buttons are illuminated.

Using the Delay On Timer

The DELAY ON feature automatically turns your unit on in 2, 4, 6, 8, or 12 hours. To use the DELAY ON feature:

1.Press the DELAY ON BUTTON. The DELAY ON BUTTON and 2 TIMER BUTTON will illuminate.

2.Press the TIMER BUTTON for your selected delay on time: 2, 4, 6, 8 or 12 hours later.

3.Select your speed level that the unit will turn on to when your selected DELAY ON time has been reached.

Note:

You can turn the DELAY ON TIMER on if your AirTamer® is off by pressing the DELAY ON BUTTON.

In the continuous operation mode, no DELAY ON buttons are illuminated.

makes life better! Page 9