Fantom Vacuum FM788HC, FM788HG, FM788HB Replacement Instructions, Replacing the Headlight Lamp

Page 14

REPLACEMENT INSTRUCTIONS

Caution: Be sure to turn the ON/OFF switch to the"OFF" position and disconnect the power cord from the wall outlet before replacing any of the parts below.

REPLACING THE HEADLIGHT LAMP

1 Set the vacuum cleaner to the parallel position.

	2	Loosen the screws to remove the lens.
	2	Screw
		Screw

Lens

When removing the headlight lamp, be careful

3 not to pull on the headlight lamp wiring.

Remove the lamp by pushing it gently in	2
4 the direction of the arrow and then turning	2
it counterclockwise.	1
	1
	Headlight Lamp	Socket
Push a new lamp gently into the socket and
5 turn it clockwise to tighten it .
Use a standard bayonet base appliance lamp	2
rated at 120V and 15W (LAMP MAX.15W).
	1
		Socket

Caution: Be careful not to clamp the headlight lamp wiring.

6 Reattach the lens and fasten the screws.

13

Image 14

Contents FM788HB FM788HC FM788HG Important Safety Instructions Read ALL Instructions Before Using this Vacuum CleanerGrounding Instructions Names of Each Part Front RearPreparations Before USE Attaching the handleThermal Safety Device in Main Body Winding the Power CordReleasing the Power Cord Adjusting the Handle Using the Vacuum CleanerON/OFF Switch RUG/FLOOR Toolsselector Height Adjustment LeverEdge Cleaning Using the Attachments Attach the attachments as shown belowHose Attachment Power cord from the wall outlet before cleaning Emptying the Dust CompartmentCleaning the Filters Cleaning UtensilClearing Blockages and Cleaning the Agitator Assembly Replacement Instructions Replacing the Headlight LampReplacing the Flat Belt Removing the Bottom Plate Reattaching the Bottom PlateCleaning the SUB-FILTER Replacing the FilterTroubleshooting Problem Cause RemedyThree 3 Year Limited Warranty