Fantom Vacuum FM788HB, FM788HG Using the Vacuum Cleaner, ON/OFF Switch, Adjusting the Handle

Page 7

USING THE VACUUM CLEANER

ON/OFF SWITCH

Start or stop vacuum cleaner by pushing

on the switch.

ON/OFF Switch

OFF

ON

ADJUSTING THE HANDLE

The handle of this vacuum cleaner can be set to one of three positions -Upright, Normal, Parallel. Place your foot on handle release lever as shown and pull back on the handle until it releases from its upright position.

Handle Release Lever

Upright position

The handle is normally locked in this position for storage or when using the attachments.

Push the handle forward

until it locks.

Normal position

This position is used for normal cleaning.

Handle Release Lever

Parallel position

This position is used for cleaning under

furniture.

6

Image 7
Contents FM788HB FM788HC FM788HG Read ALL Instructions Before Using this Vacuum Cleaner Important Safety InstructionsGrounding Instructions Front Rear Names of Each PartAttaching the handle Preparations Before USEReleasing the Power Cord Winding the Power CordThermal Safety Device in Main Body ON/OFF Switch Using the Vacuum CleanerAdjusting the Handle Edge Cleaning Height Adjustment LeverRUG/FLOOR Toolsselector Attach the attachments as shown below Using the AttachmentsHose Attachment Emptying the Dust Compartment Power cord from the wall outlet before cleaningCleaning Utensil Cleaning the FiltersClearing Blockages and Cleaning the Agitator Assembly Replacing the Headlight Lamp Replacement InstructionsReplacing the Flat Belt Reattaching the Bottom Plate Removing the Bottom PlateReplacing the Filter Cleaning the SUB-FILTERProblem Cause Remedy TroubleshootingThree 3 Year Limited Warranty