♦design formats using the appropriate
♦do not leave the printhead closed (in the locked position) longer than 30 minutes without printing. Open (unlock) the printhead before a break period, at the end of each shift, and at the end of each day.
Printing Serial Bar Codes
Currently, the 9830CL printer does not support printing serial (ladder) bar codes.
Parallel (Picket Fence) Bar Code | Serial (Ladder) Bar Code |
Adjusting Print Positions
You can adjust the supply, print, and margin positions by using the control panel buttons. Make sure a batch is not waiting to print, the printer is not paused, or has an error before you change the settings.
To change the supply, print, or margin positions:
1.Press Pause.
2.Press Feed and Clear (at the same time) once to select the supply position, twice to select the print position, and three times to select the margin position. These buttons act as toggle switches between the three (supply, print, and margin) position adjustments.
When you select the position to change, the current setting
is displayed.
3.Press Feed to decrease the current position by one dot or press Feed for two seconds to decrease the value by 10 dots.
OR
Paxar Systems Group Paxar 9840CL Printer | Printing - 3 ∙ 23 |
