9. Snap the printhead into place.

Do not touch here

Make sure the printhead cable does not

touch the ribbon roll.

10.Clean the new printhead with a cotton swab dipped in isopropyl alcohol to remove any salt or oil left from handling.

11.Let the printhead dry and reload your supplies.

12.Close the printhead assembly and the cover.

13.Turn on the printer.

14.Press Feed to position the supply under the printhead.

Paxar Systems Group Paxar 9840CL Printer

Care and Maintenance - 4 35

Page 39
Image 39
Paxar 9840CL user manual Snap the printhead into place