USING THE VACUUM CLEANER
HEIGHT ADJUSTMENT LEVER
Height Adjustment Lever
The nozzle head can be adjusted to four different height settings.
Caution:
Before using the height adj-
ustment lever,please make
sure the nozzle head is tilted
backward from the floor.
Nozzle Head
LOW | Set the height adjustment to the |
Carpet | appropriate carpet length. |
|
HIGH
Bare Floor/Tools TURN OFF BRUSH ROLL WHEN USING TOOLS.
RUG/FLOOR (TOOLS)SELECTOR
The RUG/FLOOR(TOOLS)selector should only be adjusted while the vacuum cleaner is turned on and in the upright position.
1 When cleaning a rug or carpet,first turn the ON/OFF switch to the ON position,and then set the RUG/ FLOOR(TOOLS)selector to the RUG position.
2 When cleaning a bare floor or when using one of the attachments,set the RUG/FLOOR (TOOLS)selector to the FLOOR position.
FLOOR
GUR
Rug/Floor (Tools)
SELECTOR
Caution: Do not change the setting of the RUG/FLOOR(TOOLS)selector while the vacuum cleaner is turned off.
EDGE CLEANING
This vacuum cleaner is equipped with an "edge cleaning" function for cleaning carpet edges near baseboards and stationary furniture.
7