REPLACEMENT INSTRUCTIONS
Caution: Be sure to turn the ON/OFF switch to the "OFF" position and disconnect the power cord from the wall outlet before replacing any of the parts below.
REPLACING THE AGITATOR
1 | Remove the bottom plate. |
(refer to page 15) | |
2 | Lift out the agitator assembly,and then remove the agitator assembly as shown. |
| Motor Shaft |
Flat Belt
Agitator Assembly 
3 Place the flat belt onto the pulley of the new agitator assembly.
Flat Belt 
Pulley
4 Place the agitator assembly into the grooves in the nozzle head, making sure that the new agitator assembly operate smoothly.
Brush Holder
Groove
Caution:
Install the flat belt so that it has no twists in it, and so that all components turn smoothly.
5 Reattach the bottom plate (refer to page 15)
14