REPLACEMENT INSTRUCTIONS
REMOVING THE BOTTOM PLATE
1 Set the vacuum cleaner to the parallel position and turn it over.
2 Slide the latch in the direction shown.
Pull here
Latch
PULL
Bottom Plate
3 Remove the bottom plate by pulling the tabs as illustrated.
REATTACHING THE BOTTOM PLATE
1 Insert the projection on the bottom place into the groove on the nozzle head and set the bottom plate in place.
2 Push the bottom plate as shown.
Press Press
Bottom Plate
Projection
Groove |
|
3 Slide the latch in the direction shown. | Turn the vacuum over and place in the |
4 upright position. | |
Latch |
|
15