Fantom Vacuum FM740 instruction manual

Page 3

16.Do not touch the agitator while it is spinning.

17.Do not place any heavy items on top of the vacuum cleaner.

18.Do not step on the hose or pull it too strongly.

19.Do not pick up items such as pieces of waste paper or cloth which look as though they may cause the hose to become blocked.

20.Do not clean or store the vacuum cleaner in places where there are high

temperatures.

21.Store the vacuum cleaner away from excessive humidity.

22.When carrying the vacuum cleaner, hold it by the carrying handle.

23.Before servicing the vacuum cleaner, allow all metal parts to cool first.

24.Always place foot on handle release when adjusting the handle position of the vacuum cleaner.

25.If the supply cord of this appliance is damaged, it must only be replaced by FANTOM, because special purpose tools are required.

SAVE THESE INSTRUCTIONS

This vacuum cleaner is intended for household use only.

Note to user concerning attachment plug:

To reduce the risk of electric shock, this appliance has a polarized plug (one blade is wider than the other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet. Do not change the plug in any way.

2

Image 3
Contents FM740 Important Safety Instructions Page Frontrear Names of Each PartAttaching the handle Preparations Before USEWinding the Power Cord Releasing the Power CordInserting the Power Cord Plug Edge Cleaning Using the Vacuum CleanerON/OFF Switch Adjusting the HandleInstall the wand to the hose Using the AttachmentsEmptying the Dust Compartment Power cord from the wall outlet before cleaningCleaning utensil Cleaning the FiltersCleaning and Replacing the Secondary Filters Clearing blockages in the suction Replacing the Headlight Lamp Replacement InstructionsReplacement Instructions Replacing the Agitator Replacement Instructions Removing the Bottom PlateReattaching the Bottom Plate Troubleshooting