Operating Instructions

OPERATING INSTRUCTIONS cont.

Emptying the Dust Cup Container

and Cleaning / Changing the

HEPA Filter & Debris Screen

Warning: Always unplug the unit from electrical outlet before opening the Dust Cup (container).

Important: Do NOT use the vacuum without the HEPA filter in place.

Warning: After each Use - Always remove the HEPA Filter and the Dust Cup Cover with the Debris Screen, then vigorously “TapClean” HEPA Filter and clean Debris Screen until no more dust can be removed.

IMPORTANT, Please Note : The “TapClean” HEPA Filter will stop most of the tiniest dust particles from re-entering the air you breathe. In fact it stops 99.97% of all particles as small as 0.3 microns - many times smaller than a human hair!!! Because of this incredible filtration performance, the HEPA Filter will quickly accumulate, inside the white filter folds, many fine dust particles that are difficult to see but which will eventually block or reduce your suction power - if not cleaned properly.

1.To remove the dust cup container, first press on the dust cup release button (1) that is located on the dust cup handle and at the same time press on the dust cup release button

(2) that is on the side of the upper housing. See illustration below. Then pull the dust cup container out.

Dust

Cup

Release

Button 1

Dust

Cup

Release

Button 2

2.To empty the dust cup container, press on the trap door release button that is on the back side of the dust cup container.

3.The HEPA filter is located underneath the dust cup container. (See illustration.) to remove the HEPA filter, hold the edges and pull it out slowly.

5.Hold the HEPA filter by the edges and vigorously “TapClean” the HEPA Filter dirty side down on a hard, flat surface until no more dust is observed falling out from between the pleats of the filter.

6.Reinstall the HEPA filter in the vacuum.

7.To Separate the Debris Screen from the dust cup, hold the dust cup in one hand and turn the dust cup cover counter clockwise and pull apart. To clean the Debris Screen, we

recommend that you rinse it under lukewarm running water to remove the dirt that accumulates

on it, but always

allow 24 hours to air dry before inserting back into the vacuum.

WARNING: Always remove the power plug from the wall outlet before assembling or removing accessories.

EXTENDING THE TELESCOPIC TUBE

Push the plastic button and pull out the smaller tube. See illustration below.

INSERTING THE TELESCOPIC TUBE INTO THE MAIN UNIT

•Insert the telescopic tube into the hole next to the dust cup handle. Make sure that the slot in the handle fits correctly into the opening. (See illustration.)

•To remove the telescopic tube, press the telescopic tube release button and pull the tube up.

ATTACHING THE FLOOR BRUSH TO THE MAIN UNIT

•Insert the floor brush into its location, in the direction of the arrow.

•To remove the floor brush from the main unit, press on the floor brush release button and pull the floor brush out.

ATTACHING THE HOSE TO THE MAIN UNIT

•Hold the end of the hose (see illustration below).

•Insert the hose into the hose connector (see arrow in illustration).

FM604 specifications

The Fantom Vacuum FM604 is a powerful cleaning system that has garnered attention for its innovative features and advanced technology. Designed for efficiency and ease of use, the FM604 combines functionality with a sleek design, making it a perfect addition to any home.

One of the standout features of the Fantom Vacuum FM604 is its robust suction power. Equipped with a high-performance motor, this vacuum can easily tackle dirt and debris on various surfaces, including carpets, hardwood floors, and tiles. The adjustable suction settings allow users to customize their cleaning experience, ensuring optimal performance whether you’re vacuuming delicate fabrics or deep-cleaning carpets.

The FM604 also boasts a multi-stage filtration system, which is particularly beneficial for allergy sufferers. The HEPA filter traps fine dust particles, allergens, and pet dander, ensuring that the air in your home remains clean and fresh. This filtration system not only improves indoor air quality but also enhances the vacuum's longevity by preventing clogs and maintaining consistent suction performance.

Another key characteristic of the Fantom Vacuum FM604 is its versatility. It comes with a variety of attachments, including a crevice tool, dusting brush, and upholstery nozzle, enabling users to clean hard-to-reach areas and various surfaces with ease. The vacuum's lightweight design ensures that it is easy to maneuver, making it suitable for users of all ages.

The FM604 is also designed with user convenience in mind. With features such as a large capacity dust bin, there’s less frequent emptying required, which makes the cleaning process more efficient. The vacuum is designed for easy maintenance, with washable filters that can be cleaned and reused, reducing waste and ensuring ongoing performance.

In terms of noise levels, the Fantom Vacuum FM604 operates quietly, allowing for a peaceful cleaning experience without disturbing household activities. Its corded design provides uninterrupted power, enabling users to clean larger areas without the inconvenience of battery life.

In summary, the Fantom Vacuum FM604 represents a fusion of advanced technology and practical design. With its powerful suction, HEPA filtration, versatile attachments, and user-friendly features, it offers an exceptional cleaning solution for modern homes. Whether you’re tackling everyday messes or deep-cleaning your carpets, the FM604 stands out as a reliable and effective choice.