Fantom Vacuum FM604 Air Driven Turbo Brush, Winding & Unwinding the Power Cord, ON/OFF Switch

Page 6

OPERATING INSTRUCTIONS cont.

OPERATING INSTRUCTIONS cont.

WINDING & UNWINDING THE POWER CORD

This vacuum cleaner is equipped with a convenient cord storage feature. The power cord winds around the two cord holders at the back of the unit. The bottom one has a quick cord release feature.

Turn the cord hook to the left or the right to remove the power cord. See illustration at right.

ON/OFF SWITCH

The On/Off switch has two different positions.

Push on the "I" side to turn the vacuum ON.

Push on the "O" side to turn the vacuum OFF.

=OFF

= ON

USING THE UNIT AS AN UPRIGHT

Unwind the power cord and plug into the 120V outlet.

Push down on the locking button to adjust the height of the telescopic handle.

NOTE: When vacuuming deep pile carpets or hard to vacuum carpets, lower the angle of the telescopic handle (see illustration at

right) for easier maneuverability.

USING THE UNIT AS A HAND VACUUM

Press the telescopic tube release button to remove the telescopic tube. (See page 4)

Press the floor brush release button to remove the floor brush. (See page 4)

Attach the shoulder strap to the shoulder strap attachment point. (See illustration below.)

Attach the crevice tool or the dusting brush to the end of the hose.

WARNING

After extended use, the body of the vacuum cleaner may become hot. When using the unit with the shoulder strap, the unit will touch the body of the user. Therefore, make sure that the unit body is cool before you use with the shoulder strap. If during use, the vacuum gets too warm, allow it to cool before continuing to use.

Crevice Tool

For radiators, crevices, corners, baseboards and

between cushions.

Dusting Brush

The dusting brush is used for the furniture, venetian blinds, books, lamp shades and shelves.

Intelli-SenseTMFilter Monitor

When the Intelli-SenseTMFilter Monitor lights up, it means that the dust cup is full or the HEPA filter or Debris Screen needs cleaning. You must empty the dust from the dust cup and clean the HEPA filter and Debris Screen right away.

Air Driven Turbo Brush

Using The Unit With Air Driven Turbo Brush

The efficiency of your air driven turbo brush depends on the bristle brush rotating at high speed. Strong air suction is needed to accomplish this. In order to ensure that maximum air suction is maintained, please read the following instructions:

1.Empty the dust cup frequently.

2.Always shake out the dust cup filter when emptying the dust cup container.

3.Ensure that the rotating brush is kept free of hair and string which may accumulate and decrease brush performance.

4.Keep Air Driven Turbo Brush turbine free of dirt and foreign matter. (See illustration for cleaning instructions.)

Attaching the Air Driven Turbo Brush to the Flexible Hose

To use the air driven turbo brush to clean upholstery:

1.Remove the flexible hose from the hose connector. (See below)

2.Push the air driven turbo brush onto the end of the flexible hose as far as it will go.

Important: In order to ensure that maximum air suction is maintained, empty the dust cup frequently and ensure that the rotating brush is kept free of hair and string which may accumulate and decrease brush performance.

Cleaning Air Driven Turbo Brush

Locking Latch

Tilt

Upwards

Turbine

From time to time, the turbine of your turbo brush will require cleaning. To do this:

1.Remove the turbo brush from the hose or extension tube.

2.Slide locking latch forward then tilt the top housing of the brush upwards. The top housing is hinged and will tilt up approximately 45° only.

3.There may be some dust, lint, hair, etc on the turbine wheel. Remove as much of this as possible.

4.You may also use the unit’s hose with crevice tool attached and use the vacuum to remove any additional debris from the turbine.

5.Ensure that the turbine wheel moves freely by rotating it with your finger. If the turbine does not rotate, call Customer Service for help.

6.Once clean, close the top cover of the turbo brush and slide the locking latch toward the rear of the brush to lock.

5

6

Image 6
Contents Model FM604 FantomOrdering Replacement Dust CUP Filters Please NoteFor Model FM604 Getting to Know Your Stick VAC Technical SpecificationsTrouble Shooting Guide Motor ThermostatChanging & Cleaning the Pre- Motor Filter Precautionary MeasuresCleaning & Changing the Hepa Filter Changing & Cleaning the Post Motor FilterInserting the Telescopic Tube Into the Main Unit Operating InstructionsExtending the Telescopic Tube Attaching the Floor Brush to the Main UnitUsing the Unit AS AN Upright Winding & Unwinding the Power CordON/OFF Switch Using the Unit AS a Hand Vacuum

FM604 specifications

The Fantom Vacuum FM604 is a powerful cleaning system that has garnered attention for its innovative features and advanced technology. Designed for efficiency and ease of use, the FM604 combines functionality with a sleek design, making it a perfect addition to any home.

One of the standout features of the Fantom Vacuum FM604 is its robust suction power. Equipped with a high-performance motor, this vacuum can easily tackle dirt and debris on various surfaces, including carpets, hardwood floors, and tiles. The adjustable suction settings allow users to customize their cleaning experience, ensuring optimal performance whether you’re vacuuming delicate fabrics or deep-cleaning carpets.

The FM604 also boasts a multi-stage filtration system, which is particularly beneficial for allergy sufferers. The HEPA filter traps fine dust particles, allergens, and pet dander, ensuring that the air in your home remains clean and fresh. This filtration system not only improves indoor air quality but also enhances the vacuum's longevity by preventing clogs and maintaining consistent suction performance.

Another key characteristic of the Fantom Vacuum FM604 is its versatility. It comes with a variety of attachments, including a crevice tool, dusting brush, and upholstery nozzle, enabling users to clean hard-to-reach areas and various surfaces with ease. The vacuum's lightweight design ensures that it is easy to maneuver, making it suitable for users of all ages.

The FM604 is also designed with user convenience in mind. With features such as a large capacity dust bin, there’s less frequent emptying required, which makes the cleaning process more efficient. The vacuum is designed for easy maintenance, with washable filters that can be cleaned and reused, reducing waste and ensuring ongoing performance.

In terms of noise levels, the Fantom Vacuum FM604 operates quietly, allowing for a peaceful cleaning experience without disturbing household activities. Its corded design provides uninterrupted power, enabling users to clean larger areas without the inconvenience of battery life.

In summary, the Fantom Vacuum FM604 represents a fusion of advanced technology and practical design. With its powerful suction, HEPA filtration, versatile attachments, and user-friendly features, it offers an exceptional cleaning solution for modern homes. Whether you’re tackling everyday messes or deep-cleaning your carpets, the FM604 stands out as a reliable and effective choice.