Fantom Vacuum FM744H instruction manual Cleaning the Filters, Cleaning Utensil

Page 14

CLEANING THE FILTERS

1 Remove the dust compartment.(refer to page 11)

Set the dust compartment to the parallel

2 position.Open the trapdoor,then push the release button E and pull out the main filter.

The main filter and prefilter will be removed at the same time.

Caution: Do not push the release button E at the upright position. As this may drop or damage the main filter and prefilter.

Release Button E

3

Clean the main filter and prefilter with a soft-bristled brush (not included) and

3 rinse with cold water. Allow both items to dry completely for 24 hours.

Caution:

Do not use a hard-bristled brush to clean filters. This may result in damage to the filters.

Do not attempt to dry with a hair dryer or by placing in a clothes dryer.Hot air may cause the filters to warp.

Cleaning Utensil

To maintain optimum suction power, the dust filter fins should be kept clean of dirt. Clean the filter fins free of dirt with the forked end of cleaning utensil as shown.

 

 

 

 

Cleaning Utensil

 

 

 

 

 

Reattaching the filters

Hold onto the main filter and insert into

 

Insert the main filter into the

1 prefilter as shown.

2 the dust compartment.

 

 

 

 

Align the ribs of the main filter to match

 

 

 

Prefilter

the shape of the opening in the dust

 

 

 

compartment and press firmly to insert.

 

 

 

Dust Compartment

Hole

Main Filter

 

 

 

Ribs

 

 

 

3 Close the trapdoor.

NOTE: We recommend replacing the main filter every three (3) to six (6) months, depending on the amount of use

12

Image 14
Contents FM744H Page Important Safety Instructions Read ALL Instructions Before Using this Vacuum CleanerGrounding Instructions Names of Each Part Front RearPreparations Before USE Attaching the handleDI NG T HE P OW ER C or D Inserting the Power Cord PlugPrep ARA Tions Before USE L E a S in G T HE P OW E R C or DAdjusting the Handle Using the Vacuum CleanerON/OFF Switch RUG/FLOOR Toolsselector Height Adjustment LeverEdge Cleaning Using the Attachments Upholstery tool & Dusting brushHose Attachment Using the Unit With Air Driven Turbo Brush AIR Driven Turbo BrushPower cord from the wall outlet before cleaning Emptying the Dust CompartmentCleaning the Filters Cleaning UtensilClearing Blockages and Cleaning the Agitator Assembly Replacement Instructions Replacing the Headlight LampReplacing the Flat Belt Removing the Bottom Plate Reattaching the Bottom PlateCleaning the SUB-FILTER Replacing the FilterTroubleshooting Problem Cause RemedyFive 5 Year Limited Warranty