Electrolux ELAP40, ELAP45 manual AIR Cleaner SET-UP, ELAP15, ELAP30

Page 7

airCleanerOG.qxp_AirFilter_English 1/20/14 12:05 PM Page 7

AIR CLEANER SET-UP

ELAP15, ELAP30

Place the unit away from drafty areas, as the sensors may not react accurately. Do not place near curtains, furniture, or other items that might inhibit air flow. Place the unit on a stable surface.

1. Remove protective film from the control panel.

2. Remove the front panel by pulling gently from the top portion of the panel.

3.Remove the HEPA filter and the Carbon Pre-Filter from the plastic wrapper.

4.Install the HEPA filter with the arrow showing “air flow” pointing in toward the back of the air cleaner; the white tabs at the top and bottom of the HEPA filter will point out to the front of the unit.

5.Install the Carbon Pre-Filter in front of the HEPA filter.

6. Replace the front panel by hooking the panel on the bottom of the unit.

7.Plug the power cord into a wall outlet.

8.Press and hold the POWER button until a short “beep” sounds.

9.The air cleaner will take 3-4 minutes to calibrate the air quality sensor. During this time the sensor lights will flash on and off. Once the sensor has calibrated, the lights will be on “AUTO” mode.

Electrolux Customer Service 1-800-896-9756 7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents AIR Cleaner / Purificateur D’AIR / Purificador DE Aire Contents Important SafeguardsThis Unit is for Household USE only Polarized plugELAP45 AIR Cleaner ComponentsELAP15 ELAP40 ELAP30ELAP15, ELAP30, ELAP40, ELAP45 AIR Cleaner FeaturesControl Panel ELAP15, ELAP30 AIR Cleaner SET-UPELAP40 ELAP45 ELAP15, ELAP30 ELAP40 Filter ReplacementCarbon Pre-Filter replacement Carbon Filter replacementFilter Cassette replacement Care and MaintenanceELAP30, ELAP40, ELAP45 Remote ControlBattery replacement DisposalELAP15, ELAP30, ELAP40, ELAP45 Trouble ShootingExclusions This warranty does not cover the following Small Domestic Appliance Warranty
Top Page Image Contents