Electrolux ELAP45, ELAP40, ELAP15, ELAP30 manual

Page 9

airCleanerOG.qxp_AirFilter_English 1/20/14 12:05 PM Page 9

AIR CLEANER SET-UP

ELAP45

Place the unit away from drafty areas, as the sensors may not react accurately. Do not place near curtains, furniture, or other items that might inhibit air flow. Place the unit on a stable surface.

1. Remove protective film from the control panel.

2. Remove the front panel by pulling gently from the top portion of the panel.

3. Remove the Filter Cassette and remove the plastic wrapper from it.

4.Install the Filter Cassette by gently sliding the entire cassette into the air cleaner. It should fit perfectly.

5. Replace the front panel by hooking the panel on the bottom of the unit.

6.Plug the power cord into a wall outlet.

7.Press and hold the POWER button until a short “beep” sounds.

8.The air cleaner will take 3-4 minutes to calibrate the air quality sensor. During this time the sensor lights will flash on and off. Once the sensor has calibrated, the lights will be on “AUTO” mode.

Electrolux Customer Service 1-800-896-9756 9

Image 9
Contents AIR Cleaner / Purificateur D’AIR / Purificador DE Aire Contents Important SafeguardsThis Unit is for Household USE only Polarized plugELAP15 ELAP40 AIR Cleaner ComponentsELAP30 ELAP45ELAP15, ELAP30, ELAP40, ELAP45 AIR Cleaner FeaturesControl Panel ELAP15, ELAP30 AIR Cleaner SET-UPELAP40 ELAP45 Carbon Pre-Filter replacement Filter ReplacementCarbon Filter replacement ELAP15, ELAP30 ELAP40Filter Cassette replacement Care and MaintenanceBattery replacement Remote ControlDisposal ELAP30, ELAP40, ELAP45ELAP15, ELAP30, ELAP40, ELAP45 Trouble ShootingExclusions This warranty does not cover the following Small Domestic Appliance Warranty