Daewoo DMB-3003LH owner manual To SET Sleep Mode, To SET TURBO/MILD Mode, Emergency Operation

Page 15

DMB-3003LH 2003.3.4 9:57 AM 페이지14

TO SET SLEEP MODE

When you are going to sleep, select this feature and the unit will cool off the room to the desired temperature and then increase that temperature throughout the night.

1.Press the ON/OFF button on the remote control to turn the unit on; the On LED will light on the indoor unit and “ON” will light in the remote display.

3. Press the SLEEP button on the remote controller. The unit will then be in the sleep mode and will cool the room to the desired temperature. After a while the unit will in- crease the temperature again in the cooling

mode or decrease the temperature in the heat mode of the heat pump. This process will then repeat.

2.Press the MODE button to select the desired mode. Then, set the desired temperature using the TEMP. or buttons.

TO CANCEL SLEEP MODE:

To cancel sleep mode,

press the SLEEP button

AUTO

 

 

 

again; the SLEEP indicator

 

 

 

will disappear in the dis-

 

 

 

play.

 

 

 

 

 

 

TO SET TURBO/MILD MODE

1.The unit is fixed “MILD” mode on production.

2.Press the “TURBO/MILD” button for powerful cooling.

3.When press the “TURBO/MILD” button one more time, it will be back to “MILD” mode.

EMERGENCY OPERATION

If the remote control is lost, broken or has no batteries, follow the procedures below:

1.Open the indoor unit’s cover and make sure the EMERGENCY/REMOTE switch is set to the EMER- GENCY position.

2.The unit will then turn on and depending on the room temperature, it will select the cool or heat, fan speed and fan direction automatically.

EMERGENCY/REMOTE Switch

EMR. REMOCON

3. To turn the unit off, slide or push the EMERGENCY/ REMOTE switch to the REMOTE position.

14

Image 15
Contents DMB-3003LH Important Notes Safety InstructionsRoom AIR Conditioner Instruction Contents Indoor Unit Capacity Cooling W Heating W 3220 3500 ConfigurationIndoor Unit Service CoverService Valve Location of ControlsIndoor Unit Display Indoor Unit Display Switch PanelRemote Display Remote ControllerOperation Connecting the AC CordSetting the Unit for Remote Operation Three Minute Compressor DelayHOW to Install Batteries Celsius to Fahrenheit Conversion ChartOperation mode of the remote controller To SET Auto Mode To SET Quick ModeTo SET Cool Mode To SET Dehumidifier Mode To SET only FAN ModeTo Select the FAN Direction To SET Heat ModeTo SET OFF Timer Mode To SET on Timer ModeEmergency Operation To SET Sleep ModeTo SET TURBO/MILD Mode To Cancel Sleep ModeOverview Installation DiagramAC Connection Diagram Cleaning the Indoor Cover CHANGING/CLEANING the AIR FiltersAfter the Season Care and MaintenanceSymptoms Possible Cause Possible Solutions Troubleshooting Guide